[Lowfer] Sample WSPR decode from here

[Andy - KU4XR]

Yes, that is correct Dick; WSPR transmits a 1500 cycle tone which would
put the signal at 185.500 KHz so you are set right. Thanks for looking,
but don't waste your time if you have something else you want to look
for. It has already pretty much been determined that WSPR is not going
to be very effective on LF. John A. - W1TAG says it's comporable to
QRSS-3 mode which is only a little better than CW. There has been so
much hype about WSPR, and what it could do on LF, so I am trying it
under Part-15 specs to see how well it will perform. Not a good time
of the year though. But I am starting to beleive that John is right.
WSPR probably won't cut it down here in the basement bands.



Andy - KU4XR - EM75xr - Friendsville, TN. USA
LOWfer Beacon " XR " @ 185.29875 KHz ( QRSS-60 )
Coordinates:  N:  35º 43' 54" - W:  84º 3' 16"
http://www.myspace.com/beaconxr
http://webpages.charter.net/ku4xr/


--- On Wed, 4/28/10, Dick Goodman <wa3usg at verizon.net> wrote:

> From: Dick Goodman <wa3usg at verizon.net>
> Subject: Re: [Lowfer] Sample WSPR decode from here
> To: "Discussion of the Lowfer (US, European, & UK) and MedFer bands" <lowfer at mailman.qth.net>
> Date: Wednesday, April 28, 2010, 11:40 PM
> My dial frequency should be 184.000
> KHz is this not correct?
> Nothing so far but there is horrendous static tonight.
> 
> 73
> Dick, WA3USG
> FN10LE
> 
> 
> -----Original Message-----
> From: lowfer-bounces at mailman.qth.net
> [mailto:lowfer-bounces at mailman.qth.net]On
> Behalf Of Andy - KU4XR
> Sent: Wednesday, April 28, 2010 9:38 PM
> To: lowfer at mailman.qth.net
> Subject: [Lowfer] Sample WSPR decode from here
> 
> 
> 100429 0126             
>    0.185500  Transmitting XR4TN EM75 30
> 100429 0126  43  13
> -0.1   0.185507  XR4TN EM75 30 
>          0 
>    1    0
> 100429 0128             
>    0.185500  Transmitting XR4TN EM75 30
> 100429 0128  44  14 
> 0.7   0.185507  XR4TN EM75 30 
>         -1 
>    1    0
> 100429 0130             
>    0.185500  Transmitting XR4TN EM75 30
> 100429 0130  43  13 
> 0.2   0.185507  XR4TN EM75 30 
>          0 
>    1    0
> 100429 0132             
>    0.185500  Transmitting XR4TN EM75 30
> 
> RF Current is now up to 130 mA, that's as high as it will
> go for 1 watt
> DC input. WSPR frequency shows to be at 507 in the WSPR
> window
> 
> Andy - KU4XR - EM75xr - Friendsville, TN. USA
> LOWfer Beacon " XR " @ 185.29875 KHz ( QRSS-60 )
> Coordinates:  N:  35º 43' 54" - W:  84º 3'
> 16"
> http://www.myspace.com/beaconxr
> http://webpages.charter.net/ku4xr/
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>