[Lowfer] WSPR up and running tonite at " XR "

[Andy - KU4XR]

Thanks Ralph;

I appreciate the use of your equipment. I'm generating the full watt
DC Input using the 7052 audio amp, and 130 MilliAmps of RF " I " ,
now it's try it out and see what happens. I hope it's a good night
propagation wise.
Headin for bed now, I'll check spots in the morning. NITE ALL :::


Andy - KU4XR - EM75xr - Friendsville, TN. USA
LOWfer Beacon " XR " @ 185.29875 KHz ( QRSS-60 )
Coordinates:  N:  35º 43' 54" - W:  84º 3' 16"
http://www.myspace.com/beaconxr
http://webpages.charter.net/ku4xr/


--- On Mon, 4/26/10, Ralph W5JGV <w5jgv at spectrotek.com> wrote:

> From: Ralph W5JGV <w5jgv at spectrotek.com>
> Subject: Re: [Lowfer] WSPR up and running tonite at " XR "
> To: "Discussion of the Lowfer (US, European, & UK) and MedFer bands" <lowfer at mailman.qth.net>, "Part-15 Yahoo" <part15 at yahoogroups.com>
> Date: Monday, April 26, 2010, 10:38 PM
> > If you decide to try for a
> decode; set your frequency at 184.000
> > on Upper Sideband, and the signal will be very close
> to 500 in the
> > WSPR waterfall window.
> 
> 
> Well, I'll give it a try.  I have the spare FT-747GX
> set for 184.000 USB
> with WSPR running and uploading any spots it sees.
> 
> Good luck!
> 
> 73,
> 
> Ralph  W5JGV - WD2XSH/7
> 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>