[Lowfer] Audio limiting using diodes, and capacitor
Andy - KU4XR
ku4xr at yahoo.com
Sat Apr 10 03:23:30 EDT 2010
Designator: 6H00F1D - 6Hz, Frequency Modulated, Single Channel, Digital
Big difference in Daves antenna, and a lowFER antenna !! < grin >
Andy - KU4XR - EM75xr - Friendsville, TN. USA
LOWfer Beacon " XR " @ 185.29875 KHz ( QRSS-60 )
Coordinates: N: 35º 43' 54" - W: 84º 3' 16"
http://www.myspace.com/beaconxr
http://webpages.charter.net/ku4xr/
--- On Sat, 4/10/10, Mike.WE0H <we0h at gmx.com> wrote:
> From: Mike.WE0H <we0h at gmx.com>
> Subject: Re: [Lowfer] Audio limiting using diodes, and capacitor
> To: "Discussion of the Lowfer (US, European, & UK) and MedFer bands" <lowfer at mailman.qth.net>
> Date: Saturday, April 10, 2010, 3:15 AM
> Sounds good enough for me hearing SSB
> signal. Either way, it is audio
> sounds and running in SSB mode. I don't see any issue then
> with me
> transmitting it as long as nobody complains. Worst case, I
> drop 60 bucks
> down and mod my license to include every mode under the sun
> and never
> worry about it again. Now wondering how far a Lowfer
> station will go in
> that mode? Dave /12 has been getting some very long
> distance reports
> running milliwatts but on 600 meters. Hmmm...
>
> Mike
> WE0H
>
>
>
> Andy - KU4XR wrote:
> > Hmmmm; I tried to send an attachment, but it
> didn't go thru. Must've
> > been too large ( 54 kB ) ...
> > I don't know the designator for WSPR, but it is a
> frequency modulated
> > SSB signal, or tone modulated, whichever is correct,
> if either ???
> >
> > Andy - KU4XR - EM75xr - Friendsville, TN. USA
> > LOWfer Beacon " XR " @ 185.29875 KHz ( QRSS-60 )
> > Coordinates: N: 35º 43' 54" - W:
> 84º 3' 16"
> > http://www.myspace.com/beaconxr
> > http://webpages.charter.net/ku4xr/
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Lowfer
mailing list