[Lowfer] Part 15 Problems.

[Andy - KU4XR]

Kurt:

In my knowledge of the Part-15 rules, there is no stipulation
as to the type of signal you emit, as long as it is within the
power limits, and 2nd Harmonic limits. A solid carrier, is as
valid as a series of dits, or square waves. Any mode is allowed
as long as it causes no interference.

73 :::

Andy - KU4XR - EM75xr - Friendsville, TN.
LOWfer Beacon " XR " @ 185.29893 KHz ( QRSS-60 )
Coordinates:  N:  35* 43' 54" - W:  84* 3' 16"
http://www.myspace.com/beaconxr


--- On Sun, 10/11/09, KD7JYK DM09 <kd7jyk at earthlink.net> wrote:

> From: KD7JYK DM09 <kd7jyk at earthlink.net>
> Subject: [Lowfer] Part 15 Problems.
> To: "Discussion of the Lowfer (US, European, & UK) and MedFer bands" <lowfer at mailman.qth.net>, part15 at yahoogroups.com
> Date: Sunday, October 11, 2009, 7:45 PM
> I recall reading somewhere in Part 15
> that a uniquely identifyable signal
> must be used.  I know we all follow the rule, but
> exactly in WHICH section
> of Part 15 is this mentioned?
> 
> I've been going cross-eyed trying to find it for reference,
> for example Part
> 15.xxx.
> 
> Any suggestions?
> 
> THanks,
> 
> Kurt
> 
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>