[Lowfer] LF Xtal on eBay

[Bill Ashlock]

Hi Peter,

 

I usually figure a .1% 'pull factor' is all one can hope for using a series capacitor or inductor. That Xtal, therefore, would fall short of 185.3 by quite a bit. I keep preaching a 5.185 MHz 60 cent microprocessor Xtal divided by 28 works very well but I guess coming up with a divide by 28 counter is a stickler.

 

Bill

 


 
> Date: Thu, 23 Apr 2009 10:51:55 -0500
> From: pbarick at niu.edu
> To: lowfer at mailman.qth.net
> Subject: [Lowfer] LF Xtal on eBay
> 
> Notice one 5950KC FT-243 crystal FS on the bay, 9 Hrs left.
> 
> With an IC divider ( X 1/32 = 185.94) and some padding for the watering hole locale.
> 
> Just a thought -- Peter
> ______________________________________________________________
> Lowfer mailing list
> Home: http://mailman.qth.net/mailman/listinfo/lowfer
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Lowfer at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html