[Lowfer] Lowfer Beacon XR (I think)! - Reply test

[Andy - KU4XR]

Alreadt sent Richard a message, just seeing if this one shows up
on the list

Andy - KU4XR - EM75xr - Friendsville, TN.
  LOWfer Beacon " XR " @ 184.322 KHz



--- On Sat, 10/25/08, Richard Goodman <wa3usg at verizon.net> wrote:

> From: Richard Goodman <wa3usg at verizon.net>
> Subject: [Lowfer] Lowfer Beacon XR (I think)!
> To: "LowFER Group" <lowfer at mailman.qth.net>
> Date: Saturday, October 25, 2008, 1:14 AM
> Andy,
>    I have a trace on Argo right on 184.322 KHz! Quite a bit
> of static and at
> this time I can't make out your call yet. I'm going
> to leave it run all
> night in the capture mode. It's exactly right on your
> frequency! I have the
> offset frequency set to 800 Hz and the trace there is right
> on the money.
> 
>    See capture below:
> 
> 	http://mysite.verizon.net/wa3usg/xr.jpg
> 
> 73
> Dick, WA3USG
> Mechanicsburg, PA.
> fn10le
> 
> 
> 
> 
> -----Original Message-----
> From: Andy - KU4XR [mailto:ku4xr at yahoo.com]
> Sent: Friday, October 24, 2008 5:19 PM
> To: Richard Goodman
> Subject: RE: [Lowfer] My variometer resistance
> 
> 
> I'll have it on Dick, but it is raining down here, and
> the
> ground is pretty well soaked. Usually when it rains; I lose
> some radiated output. But I'm keepin it on !! 73:
> 
> Andy - KU4XR - EM75xr - Friendsville, TN.
>   LOWfer Beacon " XR " @ 184.322 KHz
> 
> 
> > Okay Andy ... we're going to try again tonight!
> I'm
> > running QRSS30 and listening hard!!
> > Let's see how that paint can works!
> >
> > 3's on ya
> > Dick, WA3USG
> > Mechanicsburg, Pa.
> >
> > fn10le
> 
> 
> 
> 
> 
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit:
> http://mailman.qth.net/mailman/listinfo/lowfer