[Lowfer] Re: 600MRG> XGR/3 WSPR 508.5 Friday night
Edward Cole
kl7uw at acsalaska.net
Sat May 10 02:17:43 EDT 2008
At 09:58 AM 5/9/2008, John Andrews wrote:
>WE2XGR/3 will be running in WSPR mode tonight starting around 2300
>UTC, and ending at 0600 UTC. Set your receiver to 507.000 kHz USB,
>and the signal will be 1500 Hz higher, in the center of the
>1400-1600 Hz WSPR passband. Tuning accuracy in this mode is not
>critical. For those with SLM's, any setup that provides 1400-1600 Hz
>audio from a signal on 508.500 kHz should be OK. The current WSPR
>software (ver. 0.7) is available at:
>http://physics.princeton.edu/pulsar/K1JT/
>
>As noted last weekend, the decoder in the current WSPR version is
>supposed to be better than the original. Reports are welcome.
>
>John Andrews, W1TAG / WE2XGR/3
>
>
>*********** The Primary 600MRG E-mail List Website is: **********
>******************* http://www.500kc.com/ ***********************
>******* Secondary is: http://www.mines.uidaho.edu/~SHMRG/ *******
>*** Send subscribe and unsubscribe requests to this address: ****
>************** majordomo at piobaire.mines.uidaho.edu **************
I listened on 507.000 from about 0200-0600 with WSPR (.060) running
with audio from my FT-847 using the 80m inverted-vee. Nothing seen
except some interference toward the end.
*****************************************************
73, Ed - KL7UW BP40iq, 6m - 3cm
144-EME: FT-847, mgf-1801, 4x-xp20, 185w
http://www.kl7uw.com AK VHF-Up Group
NA Rep. for DUBUS: dubususa at hotmail.com
*****************************************************
More information about the Lowfer
mailing list