[Lowfer] XGR/3 WSPR 508.5 Friday night

[Gil Woodside]

John,
  I have the signal and copied the cw ID by ear but.......I still can't get 
it to decode. I'm trying to tweak the time in the WSPR program. Your signal 
looks fine on the captures.

Gil
WA1LAD

----- Original Message ----- 
From: "John Andrews" <w1tag at w1tag.com>
To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands" 
<lowfer at mailman.qth.net>; "600MRG" <shmrg at piobaire.mines.uidaho.edu>
Sent: Friday, May 09, 2008 1:58 PM
Subject: [Lowfer] XGR/3 WSPR 508.5 Friday night


> WE2XGR/3 will be running in WSPR mode tonight starting around 2300 UTC, 
> and ending at 0600 UTC. Set your receiver to 507.000 kHz USB, and the 
> signal will be 1500 Hz higher, in the center of the 1400-1600 Hz WSPR 
> passband. Tuning accuracy in this mode is not critical. For those with 
> SLM's, any setup that provides 1400-1600 Hz audio from a signal on 508.500 
> kHz should be OK. The current WSPR software (ver. 0.7) is available at:
> http://physics.princeton.edu/pulsar/K1JT/
>
> As noted last weekend, the decoder in the current WSPR version is supposed 
> to be better than the original. Reports are welcome.
>
> John Andrews, W1TAG / WE2XGR/3
> _______________________________________________
>>From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>