[Lowfer] WD2XES QRP WOLF 137.577

[John Andrews]

Jay, Bill,

Thanks for the daytime reports. Amazing what 1 watt will do.

A photo of the setup:
http://www.w1tag.com/files/TAGWOLF.jpg

The PA board is on the right. It uses a MPS6602/6652 pair in Class D. 
The exciter board is on the left. The green board in the center of it is 
the DDS section with surface-mount parts. The PLCC chip is an 89C51AC2 
controller. The dipswitches allow selection of 16 pre-programmed 
frequencies and two WOLF ID's.

John A.