[Lowfer] Re: [QRP-L] Looking for binding-post screw(s)

[KD7JYK DM09]

Here are the thumb-screw specs for the following Bunnell Key:

http://jhbunnell.com/pix-Bunnellearlykey.jpg

"Over all length 1/2"
The knurled head is 7/64" thick & 3/8" across.
The threads are 3/8" long
The screw is a 6 x 32 NC checked with a 6 x 32 tap.
Tighten the screw with a C/W rotation."

A pair of original brass thumb-screws for the binding posts (not the arm)
would be nice if someone has a pair, if not, I will check around for
something close.

Thanks,

Kurt