[Lowfer] Anyone warching for the HAARP Transmissions?

[Richard Goodman]

On 74075 I have some kind of dirty looking signal about 6 or 7 KHz wide
right where the transmission is supposed to take place ... is anyone seeing
the HAARP sig there?

Dick


-----Original Message-----
From: lowfer-bounces at mailman.qth.net
[mailto:lowfer-bounces at mailman.qth.net]On Behalf Of Gil Woodside
Sent: Saturday, January 19, 2008 1:03 AM
To: Discussion of the Lowfer (US, European, & UK) and MedFer bands
Subject: Re: [Lowfer] Anyone warching for the HAARP Transmissions?


Sorry gang. Forgot to mention I can hear the HAARP signal and the echo.
HAARP is about s-5 to s-8 and the echoes go from about s-5 down to below the
noise.
Gil
WA1LAD

----- Original Message -----
From: "Gil Woodside" <wa1lad at cox.net>
To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands"
<lowfer at mailman.qth.net>
Sent: Saturday, January 19, 2008 12:58 AM
Subject: Re: [Lowfer] Anyone warching for the HAARP Transmissions?


>I got ready at 0450 UTC. Got some nice recordings throughout the first 45
>mins, including the QRM. Looked pretty neat on the waterfall display in
>MixW. Now I'm getting ready for the 0600 test on the 7 Mhz frequency.
>
> Gil
> WA1LAD
> central Rhode Island
>
> ----- Original Message -----
> From: "Richard Goodman" <wa3usg at comcast.net>
> To: "LowFER Group" <lowfer at mailman.qth.net>
> Sent: Friday, January 18, 2008 10:55 PM
> Subject: [Lowfer] Anyone warching for the HAARP Transmissions?
>
>
>> I've been watching for the last couple of hours. Looks like they are
>> firing
>> up the pinger & making transmissions but I haven't seen any echos yet.
>> Check
>> out the HAARP website. They have 180 antennas and each antenna can run 20
>> KW. That's 3.6 Megawatts when all the transmitter cabinets are fired up.
>> I'm watching right now with my SDR/IQ. Looking at a 50 KHz span of
>> frequencies with 6.7925 MHz in the center. Antenna is a 160/80/40M
>> Sloper.
>> I'm also recording the entire 50 KHz span so I can play it back and maybe
>> look at things I missed later. I took pixs of the monitor with my digital
>> camera ... don't want to try & put pictures in the clipboard because the
>> computer is pretty busy doing the processing for the SDR/IQ plus storing
>> the
>> 50 KHz span to disk in real time.
>> Does anyone know what the railroad track looking things are down around
>> 6.75 and 6.76 MHz are? I'm pretty sure that the waveform in the center is
>> the pinger.
>>
>> Kinda fun!
>>
>> http://home.comcast.net/~wa3usg/haarp1.jpg
>>
>> 73
>> Dick, WA3USG
>>
>> _______________________________________________
>>>From the Lowfer mailing list
>> Send messages to: Lowfer at mailman.qth.net
>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>>
>
>
> _______________________________________________
>>From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>


_______________________________________________
>From the Lowfer mailing list
Send messages to: Lowfer at mailman.qth.net
To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer