[Lowfer] Anyone warching for the HAARP Transmissions?

[Dexter McIntyre W4DEX]

I see the EME signal about 2 Hz lower than the skywave signal.

Dex

Richard Goodman wrote:
> I am copying both the signal via skywave and the echo using my E-Field Probe
> ... a little better on the sloper.
>
> Dick
>
>
> -----Original Message-----
> From: lowfer-bounces at mailman.qth.net
> [mailto:lowfer-bounces at mailman.qth.net]On Behalf Of Dexter McIntyre
> W4DEX
> Sent: Saturday, January 19, 2008 12:24 AM
> To: Discussion of the Lowfer (US, European, & UK) and MedFer bands
> Subject: Re: [Lowfer] Anyone warching for the HAARP Transmissions?
>
>
> 3.6 MW per this press release:
>
> http://www.nrl.navy.mil/pressRelease.php?Y=2008&R=4-08r
>
> Reflection was perfectly audible for a while around 0517Z.
>
> Dex
>
> Jay Rusgrove wrote:
>   
>> Wonder what they're running for power...
>>
>> Jay
>>
>>
>> ----- Original Message -----
>> From: "Dexter McIntyre W4DEX" <dmcintyre at att.net>
>> To: "Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands"
>>     
> <lowfer at mailman.qth.net>
>   
>> Sent: Saturday, January 19, 2008 12:13 AM
>> Subject: Re: [Lowfer] Anyone warching for the HAARP Transmissions?
>>
>>
>>
>>     
>>> Dick,
>>>
>>> Looks like pretty strong reflections from the moon!  Wonder if anyone
>>> DFed the QRM signal?
>>>
>>> Dex
>>>
>>> Richard Goodman wrote:
>>>
>>>       
>>>> I've been watching for the last couple of hours. Looks like they are
>>>>         
> firing
>   
>>>> up the pinger & making transmissions but I haven't seen any echos yet.
>>>>         
> Check
>   
>>>> out the HAARP website. They have 180 antennas and each antenna can run
>>>>         
> 20
>   
>>>> KW. That's 3.6 Megawatts when all the transmitter cabinets are fired up.
>>>> I'm watching right now with my SDR/IQ. Looking at a 50 KHz span of
>>>> frequencies with 6.7925 MHz in the center. Antenna is a 160/80/40M
>>>>         
> Sloper.
>   
>>>> I'm also recording the entire 50 KHz span so I can play it back and
>>>>         
> maybe
>   
>>>> look at things I missed later. I took pixs of the monitor with my
>>>>         
> digital
>   
>>>> camera ... don't want to try & put pictures in the clipboard because the
>>>> computer is pretty busy doing the processing for the SDR/IQ plus storing
>>>>         
> the
>   
>>>> 50 KHz span to disk in real time.
>>>> Does anyone know what the railroad track looking things are down around
>>>> 6.75 and 6.76 MHz are? I'm pretty sure that the waveform in the center
>>>>         
> is
>   
>>>> the pinger.
>>>>
>>>> Kinda fun!
>>>>
>>>> http://home.comcast.net/~wa3usg/haarp1.jpg
>>>>
>>>> 73
>>>> Dick, WA3USG
>>>>
>>>> _______________________________________________
>>>> >From the Lowfer mailing list
>>>> Send messages to: Lowfer at mailman.qth.net
>>>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>>>>
>>>>
>>>>
>>>>         
>>> _______________________________________________
>>> >From the Lowfer mailing list
>>> Send messages to: Lowfer at mailman.qth.net
>>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>>>
>>>       
>> _______________________________________________
>> >From the Lowfer mailing list
>> Send messages to: Lowfer at mailman.qth.net
>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>>
>>
>>     
>
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>
>