[Lowfer] Multi-tone Signal

[Steve Sykes]

Lloyd,
I see the signal in the SpecJT window and have centered it under the bw 
indicator by adjusting the frequency a bit.  The time should be ok as it 
is synced in XP.  I have it set to Z time.  I will let it run to see it 
it will decode.  I can hear the signal better than it looks on the screen.
Steve
lloyd chastant wrote:
> Steve make sure you pick the JT65A mode and Jays signal appears  in
> the window od that program..and set you time correctly
> de Lloyd W3NF
>
> On Tue, Dec 30, 2008 at 10:22 PM, Steve Sykes
> <stevesykes at rochester.rr.com> wrote:
>   
>> Thanks Lloyd,
>> I see the email preceding mine. It didn't get here in time. I have re-set my
>> receiver to 507 and have downloaded the program. The signal is quite loud
>> here but I haven't been able to decode anything yet.
>> Steve
>> lloyd chastant wrote:
>>     
>>> Steve
>>>
>>> WE2XGR/2 plans to be transimtting in JT65A mode tonight starting at ~
>>> 2200Z continuing until ~0400Z on 507.000 (dial) kHz. In other
>>> words...set your receiver to USB with a dial frequency of 507.000 kHz.
>>> We are currently experiencing high wind conditions which I hope will
>>> leave the vertical / tophat antenna intact. If there is any change to
>>> the above schedule I'll post an update.
>>>
>>> A suitable decoder is available in the WSJT software and can be found
>>> here:
>>>
>>> http://www.physics.princeton.edu/pulsar/K1JT/
>>>
>>> de Lloyd W3NF
>>>
>>> On Tue, Dec 30, 2008 at 10:09 PM, Steve Sykes
>>> <stevesykes at rochester.rr.com> wrote:
>>>
>>>       
>>>> I am hearing a multi-tone signal on 508.310.  What is it? What mode?
>>>> Steve W2SES
>>>> FN12gx
>>>> _______________________________________________
>>>>
>>>>         
>>>>> From the Lowfer mailing list
>>>>>
>>>>>           
>>>> Send messages to: Lowfer at mailman.qth.net
>>>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>>>>
>>>>
>>>>         
>>> _______________________________________________
>>> >From the Lowfer mailing list
>>> Send messages to: Lowfer at mailman.qth.net
>>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>>>
>>>
>>>       
>> _______________________________________________
>>     
>>> From the Lowfer mailing list
>>>       
>> Send messages to: Lowfer at mailman.qth.net
>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>>
>>     
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>
>