[Lowfer] Beacon VLF on 510.100 KHZ Now in QRSS

[Paul Cianciolo]

John,

Thanks for looking last night.
I just got back in from working on the ground system.

I put down a 24 foot diameter circle of copper wire.
30 12 footers around the circle.
Also attached all the rest of the radial I already had.

The antenna measures 18 Ohms, and 230 PF.

Significant improvement. If you could look again I would appreciate it.
I am going to try to get a matching transformer out there before dark.

Thanks John

PauLC
W1VLF
http://www.rescueelectronics.com/



-----Original Message-----
From: lowfer-bounces at mailman.qth.net
[mailto:lowfer-bounces at mailman.qth.net]On Behalf Of John Andrews
Sent: Monday, October 29, 2007 6:56 AM
To: Discussion of the Lowfer (US, European, & UK) and MedFer bands
Subject: Re: [Lowfer] Beacon VLF on 510.100 KHZ Now in QRSS


Paul,

After looking through a night's captures of V's, L's and F's, I guess 
this one from 0520 UTC looks the closest to a complete callsign:
http://www.w1tag.com/files/VLF.jpg

Some of the various letters overnight were very bright and clear, but 
it's tough to get a complete callsign at this frequency without some 
holes punched in it.

Anyway, the DX in this case was 73 miles.

John Andrews, W1TAG

_______________________________________________
>From the Lowfer mailing list
Send messages to: Lowfer at mailman.qth.net
To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer