[Lowfer] Re: 600MRG> WE2XGR/1 JT2 506.3 at 01:00

[Steve Sykes]

Warren,
I also saw the signal, about 30 db above the noise, but am running Linux 
so couldn't decode anything.

Steve
W2SES
k2ors at comcast.net wrote:
> Jay, Stan, Fred, Vern,
>
>     Thanks for trying to decode the JT2 last night. I will try a local setup into the dummy load and see if I can decode it across the room before I put it back on the air.
>
>
> --
> 73 Warren K2ORS
> WD2XGJ     136-140kHz
> WD2XSH/23 505-510kHz
> WE2XEB/2   160-189kHz
> WE2XGR/1 505-515kHz
>
> FN42hi
> http://www.w4dex.com/wd2xgj.htm
>
>  -------------- Original message ----------------------
> From: "Jay Rusgrove" <JRusgrove at comcast.net>
>   
>> Warren
>>
>> Checked it on my setup here...transmits pretty close  - 800.13 Hz. Wasn't able 
>> to get it to
>> communicate locally though - can't imagine what the problem might be. May 
>> revisit it sometime in the
>> future.
>>
>> Jay
>>
>>
>>
>>
>>
>> ----- Original Message ----- 
>> From: <k2ors at comcast.net>
>> To: "Lowfer on QTH.Net" <lowfer at mailman.qth.net>
>> Cc: "600MRG" <shmrg at piobaire.mines.uidaho.edu>
>> Sent: Tuesday, October 09, 2007 10:18 PM
>> Subject: Re: 600MRG> WE2XGR/1 JT2 506.3 at 01:00
>>
>>
>>     
>>> WE2XGR/1 Now QRT on JT2  No reports received.  I believe that the audio tones 
>>>       
>> used by JT are
>> higher than those generated by other programs and this placed my signal closer 
>> to 506.6 instead of
>> the advertised 506.3
>>     
>>> Thanks to all those that looked for my JT2 test.
>>>
>>> --
>>> 73 Warren K2ORS
>>> WD2XGJ     136-140kHz
>>> WD2XSH/23 505-510kHz
>>> WE2XEB/2   160-189kHz
>>> WE2XGR/1 505-515kHz
>>>
>>> FN42hi
>>> http://www.w4dex.com/wd2xgj.htm
>>>
>>>  -------------- Original message ----------------------
>>> From: k2ors at comcast.net
>>>       
>>>> Hello the list,
>>>>
>>>>   Following up on Stan's post to the list I will transmit a test message in 
>>>>         
>> JT2
>>     
>>>> mode tonight at 0:100 UTC (9PM EDT) on 506.3.
>>>>
>>>>   Please have a little patience as this WSJT software is new to me!
>>>>
>>>> description of JT2:
>>>>
>>>> http://physics.princeton.edu/pulsar/K1JT/JT2_JT4.TXT
>>>>
>>>>  To run JT2, download WSJT version 5.9.8 r558 at:
>>>>
>>>> http://physics.princeton.edu/pulsar/K1JT/WSJT598.EXE
>>>>
>>>> --
>>>> 73 Warren K2ORS
>>>> WD2XGJ     136-140kHz
>>>> WD2XSH/23 505-510kHz
>>>> WE2XEB/2   160-189kHz
>>>> WE2XGR/1 505-515kHz
>>>>
>>>> FN42hi
>>>> http://www.w4dex.com/wd2xgj.htm
>>>>
>>>>
>>>> *********** The Primary 600MRG E-mail List Website is: **********
>>>> ******************* http://www.500kc.com/ ***********************
>>>> ******* Secondary is: http://www.mines.uidaho.edu/~SHMRG/ *******
>>>> *** Send subscribe and unsubscribe requests to this address: ****
>>>> ************** majordomo at piobaire.mines.uidaho.edu **************
>>>>
>>>>         
>>>
>>> *********** The Primary 600MRG E-mail List Website is: **********
>>> ******************* http://www.500kc.com/ ***********************
>>> ******* Secondary is: http://www.mines.uidaho.edu/~SHMRG/ *******
>>> *** Send subscribe and unsubscribe requests to this address: ****
>>> ************** majordomo at piobaire.mines.uidaho.edu **************
>>>
>>>       
>>
>> *********** The Primary 600MRG E-mail List Website is: **********
>> ******************* http://www.500kc.com/ ***********************
>> ******* Secondary is: http://www.mines.uidaho.edu/~SHMRG/ *******
>> *** Send subscribe and unsubscribe requests to this address: ****
>> ************** majordomo at piobaire.mines.uidaho.edu **************
>>
>>     
>
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>
>