[Lowfer] Kenwood TS440 LF Mod

[Howell, Laurence (Shanghai/Singapore)]

Just done the same sort of thing to the 870,,,,, its a bit more livelier now on 500.  Mod was by passing two 68 ohm resistors in the switched filter signal line.  I couldn't find the mod listed but it appears good.



----- Original Message -----
From: lowfer-bounces at mailman.qth.net <lowfer-bounces at mailman.qth.net>
To: Discussion of the Lowfer (US, European, &amp;  UK) and MedFer bands <lowfer at mailman.qth.net>
Sent: Sun Oct 07 13:17:29 2007
Subject: Re: [Lowfer] Kenwood TS440 LF Mod

http://www.we0h.us/Amateur_Radio_stuff/TS440/MW_Attenuator_removal.doc

That's the mod. Sounds like you have it already.

Mike
WE0H

Mitch Powell wrote:
> I would like to give JB a hand in doing the mod to the TS440 - apparently a
> bypass or removal of an MF/LF pad. He apparently has somewhere between 20
> and 50 dB of attenuation on LF - which is his primary listening interest, of
> course ! 
> Does anyone have a link to; or a copy of the instructions for this mod ?
> 
> I have found one - described as an MF ( 500khz - 1600 kHz ) Broadcast band
> pad removal - Is this the guilty party ?
> 
> Thanks
> 
> Mitch VE3OT
_______________________________________________
>From the Lowfer mailing list
Send messages to: Lowfer at mailman.qth.net
To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer