[Lowfer] XGR Domino EX QSO tonight

[John Andrews]

Mike,

I think default is USB, but there's a normal/reverse button on the 
screen. I've got my R75 in CW mode with 700 Hz bfo pitch, and MultiPSK 
set for 700 Hz on receive, and it works fine.

We'll give you some stuff to watch...

JA

Mike Staines wrote:
> John (et al):
> 
> This is my first time with this mode and software. If you have a second 
> before the QSO:
> 
> What Sideband should I be listening to in order to get the tones right?
> 
> I see some activity and aligned the markers with the spectral lines but 
> can not copy with either regular or reverse polarity. I tried changing 
> sidebands but that did not hellp either.
> 
> Good luck on the QSO!
> 
> Mike
> wM1ke
> ----- Original Message ----- From: "John Andrews" <w1tag at w1tag.com>
> To: "The email list for the ARRL 600 Meter Experimental License Group" 
> <500kc at 500kc.com>; "Discussion of the Lowfer (US, European, &amp; UK) 
> and MedFer bands" <lowfer at mailman.qth.net>
> Sent: Saturday, November 24, 2007 6:23 PM
> Subject: [Lowfer] XGR Domino EX QSO tonight
> 
> 
>> Jay and I will try a somewhat faster QSO at 0200 UTC tonight on 
>> 506.500 kHz. We will be running Domino EX4 with FEC enabled. Use 
>> MultiPSK to decode, select Domino EX, and click the "4" and "FEC" 
>> boxes in the right center of the screen. Reports are welcome.
>>
>> MultiPSK may be downloaded at:
>> http://f6cte.free.fr/index_anglais.htm
>>
>> John Andrews, W1TAG/WE2XGR/3, etc.
>>
>> _______________________________________________
>>> From the Lowfer mailing list
>> Send messages to: Lowfer at mailman.qth.net
>> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer 
> 
> _______________________________________________
>> From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
> 
>