[Lowfer] DCF-39 on west coast, seen on Argo?

Steve Ratzlaff steveratz at eoni.com
Sat Nov 17 09:27:03 EST 2007


Thanks.
Unfortunately the Loran line chart only goes up to 137.8kc.
But your picture shows the DCF39 as being 0.5Hz high, which is what I'm 
seeing on my own capture.
Steve
----- Original Message ----- 
From: "Jay Rusgrove" <JRusgrove at comcast.net>
To: <lowfer at mailman.qth.net>
Sent: Friday, November 16, 2007 8:18 PM
Subject: Re: [Lowfer] DCF-39 on west coast, seen on Argo?


> Steve
>
> W1TAG loran line info which should cover all US locations:
>
> http://lwca.org/library/reference/LORAN/loran_lines.htm
>
> I'm reading DCF39 at 138830.59 + or - .01 or .02 Hz.
>
> Here's a shot with 30 dB attenuation in front of the reciver to knock the 
> sig down some:
>
> http://www.w1vd.com/DCF39111607.jpg
>
> Jay
>
>> ----- Original Message -----
>> From: "Steve Ratzlaff" <steveratz at eoni.com>
>> To: <lowfer at mailman.qth.net>
>> Sent: Friday, November 16, 2007 10:58 PM
>> Subject: [Lowfer] DCF-39 on west coast, seen on Argo?
>>
>>
>> > I'm trying to figure out if I can see DCF-39 here on the West Coast, 
>> > North
>> > America. I see some "stuff", but not sure what I'm seeing. Is there a
>> > formula for figuring out the Loran line at a given frequency range? I'm
>> sure
>> > there is but I have no idea how to do it. I tried extrapolating from 
>> > the
>> > lwca.org Loran lines charts, but the difference is so large I don't 
>> > think
>> > I'm anywhere close.
>> > I'm seeing what I think are 3 Loran lines; I believe my system accuracy 
>> > is
>> > 0.05 Hz for a 30 second Argo mode.
>> > How accurate is the DCF-39 138,830 frequency? I'm not seeing anything
>> right
>> > on that frequency, in 30 second Argo mode. But I'm seeing a fairly 
>> > strong
>> > fuzzy trace about 0.50 Hz above 138,830 that's about 0.15 Hz wide.
>> > I'm seeing what I think is a fairly strong Loran line on 138,831.40. I
>> think
>> > another Loran line is on 138,827.93 and one on 138,833.05--all in 30
>> second
>> > Argo mode.
>> >
>> > Any help or tips about this would be most appreciated.
>> > 73,
>> > Steve
>> > NE Oregon
>> >
>> > _______________________________________________
>> > >From the Lowfer mailing list
>> > Send messages to: Lowfer at mailman.qth.net
>> > To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>>
> _______________________________________________
>>From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer 



More information about the Lowfer mailing list