[Lowfer] more WOLF

[Jay Rusgrove]

Dick Bill

Thanks for the reports.

Haven't listened tonight so don't know static condx. At 0200 I'll increase power to 100 watts and
leave it there until shutdown at 0300Z

Jay W1VD / WD2XNS


----- Original Message ----- 
From: "Bill de Carle" <ve2iq at magma.ca>
To: <lowfer at mailman.qth.net>
Sent: Wednesday, March 14, 2007 9:35 PM
Subject: Re: [Lowfer] more WOLF


> At 06:47 PM 3/14/2007, Jay wrote:
> >For something different...WD2XNS will run double speed WOLF(20)
> >tonight on 137.577 kHz. Power will
> >be 10 watts.
> >
> >Reports appreciated.
>
> Hi Jay:
>
> Well, you're doing much better than John tonight - static is
> horrible; I think the faster speed helps
> a lot more than the extra power.  Got a few decodes from John's 2
> watts but nothing that would build up
> solidly.  The QSB is fast - when you're up I can actually hear your
> signal - but it doesn't stay up for
> very long.  The timestamp (below) is off by an hour - guess related
> to our early DST this year.  The
> correct time run started was 01:25:06.
>
> Bill VE2IQ
>
> 2007-03-15 02:25:06 >WOLF20  -r 8100.200 -f 799.950 -t 1.0 -w 0.0000
> t:  12 f:-0.076 a: 1.3 dp: 92.4 ci:15 cj:276 S5B1QKSQ Z66R*6 ?
> t:  24 f:-0.774 a:-0.2 dp: 90.4 ci: 3 cj: 89 ER2/JOUYYLCVS8L ?
> t:  48 f: 0.706 a: 0.1 dp: 87.0 ci:11 cj:455 IO/3N8714  Q Y7 ?
> t:  96 f: 0.000 pm:48.26 jm:124 q: -6.9 -9.0 CBD* DJEY5J1LZ9 ?
> t: 144 f: 0.000 pm:120.7 jm:123 q: -4.6 -3.3 WD2XNS WOLF*20* -
> t: 192 f: 0.000 pm:216.6 jm:123 q: -2.6 -1.4 WD2XNS WOLF*20* -
> t: 240 f: 0.000 pm:258.7 jm:123 q: -1.9 -0.4 WD2XNS WOLF*20* -
> t: 288 f: 0.000 pm:291.3 jm:123 q: -1.0  0.4 WD2XNS WOLF*20* -
>
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer