[Lowfer] more on preamplifiers

[Jay Rusgrove]

Nick

Stop in some time - I see you drive by the shop every now and then. Guess you never made it over to
the LWCA LF reflector...which is now defunct...so we're back here. John pretty much summed it up.
Details of the license can be seen here:

http://www.w1vd.com/WD2XNS%20license.pdf

There's about a half dozen similar licenses and about half of them are currently active. Other
stations can be found near the top of the following list.

http://www.lwca.org/sitepage/part15/index.htm

Lots of good information about Part 5 stuff on John's site:

http://www.w1tag.com/

Jay W1VD / WD2XNS


----- Original Message ----- 
From: "w1att" <w1att at snet.net>
To: "'Discussion of the Lowfer (US, European, &amp; UK) and MedFer bands'" <lowfer at mailman.qth.net>
Sent: Thursday, March 01, 2007 11:23 PM
Subject: RE: [Lowfer] more on preamplifiers


> Hey Jay,
>
> What does the /WD2XNS after your callsign mean??
>
> Nick W1ATT
>
>
>
>
>
>
> -----Original Message-----
> From: lowfer-bounces at mailman.qth.net [mailto:lowfer-bounces at mailman.qth.net]
> On Behalf Of Jay Rusgrove
> Sent: Thursday, March 01, 2007 3:46 PM
> To: lowfer at mailman.qth.net
> Subject: Re: [Lowfer] more on preamplifiers
>
> Zack
>
> Sounds like you've found the culprit. I would suggest the series tuned /
> transformer coupling approach in John's article - that's what I use on my
> 10' 14T 'Octoloop' and it works very well. I find that for best results on
> long haul DX a preamplifier is required ahead of the various receivers I use
> here (Harris RF-590, R75 and HP 3586C).
>
> Jay W1VD / WD2XNS
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer