[Lowfer] WE2XGR/2 testing in Pactor1FEC mode and RTTY

[James M. Walker]

Ola Jay,
I have two computers tied up here, but your signal is good and loud into 
Buffalo
RTTY sigs just a little below the level of XGR/6 CW

I guess it is time to drag another computer over there and set the FSK copy
software up huh?

Good sigs anyway.
Jim
WB2FCN/WD2XSH-22

----- Original Message ----- 
From: "Jay Rusgrove" <JRusgrove at comcast.net>
To: <lowfer at mailman.qth.net>; "SHMRG at piobaire.mines.ui" 
<SHMRG at piobaire.mines.uidaho.edu>
Sent: Tuesday, December 18, 2007 6:53 PM
Subject: [Lowfer] WE2XGR/2 testing in Pactor1FEC mode and RTTY


> WE2XGR/2 will be making test transmissions tonight in RTTY 45 baud 200 Hz 
> shift and Pactor1FEC on
> 508.5 kHz. MultiPSK can be used for decoding both modes although there may 
> be other programs that
> will work as well.
>
> RTTY 0000 - 0100Z. Note RTTY is 200 Hz shift, not 170.
>
> Pactor1FEC 0100 - 0200 Z.  Note: Run Pactor1FEC with "RX without 
> repetition" button depressed
>
> Reports are always appreciated.
>
> Jay W1VD  WD2XNS  WE2XGR/2
>
> _______________________________________________
>>From the Lowfer mailing list
> Send messages to: Lowfer at mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>
>
>