[Lowfer] HiFER LP On Cloudbuster!

Sat May 8 01:24:17 EDT 2004

Hey Larry

This is good clean fun!

I'll leave her running.  You can also look at the arc. at:

www.scottboxx.com\radio_data\argo1

if it doesn't crash due to the memory leak at about 8am tomorrow the
directory will change to

www.scottboxx.com/radio_data/argo2

then back after another 24hrs when it will del. the argo1 dir. and repeat
the cycle...

BTW, I've seen NC so there is hope...

RX antenna here is a 80m Zepp tuned to freq. at 10m

Scott
----- Original Message -----
From: "Tom Norris" <[email protected]>
To: <[email protected]>
Sent: Friday, May 07, 2004 4:38 PM
Subject: Re: [Lowfer] HiFER LP On Cloudbuster!

> Very nifty, even saw ARO in there on and off
> on 13.5550
>
> >Thanks Scott,
> >
> >I have been capturing your captures  :-)
> >
> >You are at the outer limits of the coverage area of the vertical.
> >If you are going to see me it will probably be between 0100 - 0300 utc.
> >What antenna are you using to receive?
> >
> >73
> >
> >Larry
> >
> >
> >
> >
> >Scott Tilley wrote:
> >
> >>Hey Larry
> >>
> >>I'm tuned to you on my argo viewer:
> >>
> >>www.scottboxx.com\radio
> >>
> >>A chance to compare if the band opens today... The viewers freq
represents
> >>133554.xxx
> >>
> >>I'm having a problem with a win386.swp file "memory leak" on the
computer
> >>doing the web uploading so if it stops I ran out of 1GB of memory :)  I
> >>should have the problem solved soon but it should run for the day
without
> >>trouble. The joys of C interpreters...
> >>
> >>Scott
> >>
> >>----- Original Message -----
> >>From: "Larry Putman" <[email protected]>
> >>To: <[email protected]>
> >>Sent: Friday, May 07, 2004 7:31 AM
> >>Subject: Re: [Lowfer] HiFER LP On Cloudbuster!
> >>
> >>
> >>
> >>>Just to make things more interesting I have also placed a second beacon
> >>>using my PC-VFO 4 mw output
> >>>and my vertical antenna. This beacon will be just below the SawTooth
> >>>pattern on 13.5549.72 Mhz.
> >>>Sending QRSS3 LP and CW ID at 15 wpm. The CW id  is about every 2
minutes.
> >>>I am really curious to see how the 2 beacons compare!
> >>>
> >>>73
> >>>
> >>>Larry WB3ANQ
> >>>
> >>>
> >>>
> >>>Larry Putman wrote:
> >>>
> >>>
> >>>
> >>>>All,
> >>>>
> >>>>I have finally got around to constructing a HiFER CloudBuster NVIS
> >>>>dipole!
> >>>>The pattern is pretty much North/South to see if the New England/
> >>>>Southern stations
> >>>>that are closer to my QTH can copy my Beacon. The 1/2 wave dipole is
> >>>>about 10' off the ground.
> >>>>I am sending a SawTooth pattern and phase modulated CW ID from my
> >>>>HP3336 at 4 mw on 13.554980 Mhz.
> >>>>It is on the air as of 1330 UTC Friday and will remain on till further
> >>>>notice.
> >>>>All reports are most welcomed!!
> >>>>
> >>>>73
> >>>>
> >>>>Larry WB3ANQ FM19rc
> >>>>Pasadena, MD.
> >>>>_______________________________________________
> >>>>
> >>>>
> >>>>
> >>>>>From the Lowfer mailing list
> >>>>>
> >>>>>
> >>>>Send messages to: [email protected]
> >>>>To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
> >>>>
> >>>>
> >>>>
> >>>_______________________________________________
> >>>From the Lowfer mailing list
> >>>Send messages to: [email protected]
> >>>To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
> >>>
> >>>
> >>
> >>_______________________________________________
> >>>From the Lowfer mailing list
> >>Send messages to: [email protected]
> >>To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
> >>
> >>
> >_______________________________________________
> >From the Lowfer mailing list
> >Send messages to: [email protected]
> >To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>
> _______________________________________________
> From the Lowfer mailing list
> Send messages to: [email protected]
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer