[Lowfer] Who shipped me the #8 wire a while ago?

Mon, 12 Jan 2004 23:18:32 -0600

Hey Bill,

Oh yea, it sure should radiate a bit of signal. I still have to get those
pictures to Dex. It was so damn fun installing that loop with your help. You
will have to make it a habit of coming to Minnesota from time to time. Are
you sure you don't want to move to MN???

I think I will set the loop in a diamond shape like you were saying to keep
the lower run way up high for lower ground losses. This loop will probably
blast Lyle off his chair harder than the North/South loop does even though
it is pointing the other way!!!

Been working on the car tonight so nothing gained on the tuner box yet. I
believe I have the weekend to myself so there is no excuse for not getting
it done. You'll have to schedule another trip later on to do some field
strength tests unless I had such a fine meter to do the tests myself since
you showed me how to do them. Hint hint...

Later,
Mike>WE0H

-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Bill Ashlock
Sent: Monday, January 12, 2004 11:09 PM
To: [email protected]
Subject: RE: [Lowfer] Who shipped me the #8 wire a while ago?

>Exactly 200'.

Aw, too bad Mike. That'll hold ya to the DMP (defacto maximum perimeter).
<G> You DO have a loop that is over 60ft tall on average so you can run that
lower section >10ft above gnd with a ground loss lower than the rest of us.
Should be a killer!

>It was one of my test loops back when I made measurements on a number of
>conductors to compare notes will Bill. Those tape wraps supported the
>toroids for coupling into the loop on one side and the current
>transformer monitor on the other side.

Sorry Jay, they had to go in order to slide it over the tops of three trees.

>Pour the coal to it.

He'd better. ......And soon!

Bill

_________________________________________________________________

_______________________________________________