[Lowfer] Ground Radials Progress

[Peter Barick]

>>> riese-k3djc@juno.com 10/27/03 02:43PM >>>

On Mon, 27 Oct 2003 14:14:48 -0600 "Peter Barick"
<A20PJB1@wpo.cso.niu.edu> writes:
> Constructing the GND radial system as I last described. All working 
> to plan, esp.the CU bus pipe.

"
The idea of notched to accept the wire is a good idea. I wrapped wire
around the pipe and
soldered it but the wire doesnt always wrap tight. If you drove a pipe
in
the ground and sawed
several notches length ways you should be able to stack many wires in
the
notches,, stacking
many in the same notch, fan them out on the ground,,,,

Good idea

Bob  K3DJC
"

You got it, Bob. I chose horizontal for the pipe rail to keep all wires
high off the ground, esp. for show buildup. Plan on covering the rails
w/ something too.