[Lowfer] RXing TAG in PSKAM10

Sun, 9 Nov 2003 11:21:25 -0500

John,

Here is a cut and paste of the PSKAM10 From 11:05 Am

AG TAG TAG HOLDEN, MA FN42CH IN PSKAM10 MODE ON 185.800 KHZ. REPEATING...

�KK

TAG TAG TAG HOLDEN, MA FN42CH IN PSKAM10 MODE ON 185.800 KHZ. REPEATING...

�AIIF��X TAG TAG HOLDEN, MA FN42CH IN PSKAM10 MODE ON 185.800 KHZ.
REPEATING...

�!/�5TAG TAG TAG HOLDEN, MA FN42CH IN PSKAM10 MODE ON 185.800 KHZ.
REPEATING...

�%KN,TAG TAG TAG HOLDEN, MA FN42CH IN PSKAM10 MODE ON 185.800 KHZ.
REPEATING...

�%KK,TAG TAG TA 8

Still working some bugs out of RX .

Using a SLM by W&G for RX

Paul A. Cianciolo
W1VLF
Beacon "USA" 1704.805.00 Khz QRSS 3
FN 31

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of John Andrews
Sent: Sunday, November 09, 2003 9:38 AM
To: [email protected]
Subject: [Lowfer] TAG in PSKAM10 Mode

TAG will be running in PSKAM10 mode on 185.800 kHz for the next few days.
The MultiPSK software may be found at:
http://members.aol.com/f6cte/

In tests over the summer, good daytime copy was had by VD at 80 miles, and
by myself at 140 miles. Nighttime copy was spotty, and it was not very
resistant to thunderstorm static. But the throughput is excellent, about 6
wpm. Be advised that with weak signals, you may want to restart the program
occasionally if nothing is coming through.

Any reports will be welcome.

John Andrews, W1TAG
TAG/RY Status: http://webpages.charter.net/w1tag/

_______________________________________________
From the Lowfer mailing list
Send messages to: [email protected]
To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer