[Lowfer] latest 127851 Hz

Sat, 10 May 2003 17:18:02 -0700

As the freq. around 127 is clear I did an over nite but as expected saw
nil
until I get some time to play with my rcv loop to attempt to null the QRM
at 136/7,, it is pretty useless... I would look at he Part 15 freq. but
if
Youse boys that are freq agile could get to the same couple of Hz,,
it would make it more interesting. Under 136 would be a good spot
the crap goes away at 130 or so 

Bob  K3DJC

On Sat, 10 May 2003 13:10:52 -0400 "Bill Ashlock" <[email protected]>
writes:
> Jay and John,
> 
> Good show! Looks like this is working.
> 
> I just came across a simple way of getting into the 136-137 band by 
> adding a 
> switch to divide the xtal freq by 26 instead of 28. This would put 
> me at 
> 137.67 but it could be very near to Mitch's 137.78, depending on the 
> trimmer 
> adjustment. BTW, this is a 3.579545 color sub carrier Xtal in case 
> anyone is 
> planning to build a simple exciter.
> 
> Will let you guys know what the plan will be for any change from 
> 127.851 but 
> will switch back to QRSS60 in about 20min.
> 
> Bill
> 
> _________________________________________________________________
> MSN 8 with e-mail virus protection service: 2 months FREE*  
> http://join.msn.com/?page=features/virus
> 
> _______________________________________________
> From the Lowfer mailing list
> Send messages to: [email protected]
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
> 
> 