[Lowfer] 185.300 and UWL

Fri, 21 Mar 2003 21:20:10 -0600

Hey Eric,
Just slightly change the Epson's 5v supply line as it will change the
frequency a bit.

Mike>WE0H

www.we0h.us/lf

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Eric Smith
Sent: Friday, March 21, 2003 9:08 PM
To: [email protected]
Subject: Re: [Lowfer] 185.300 and UWL

On Fri, 21 Mar 2003, Bill Ashlock wrote:
>
> Being Friday and all, ...... under normal circumstances, I would send you
a
> TGIF zinger about unauthorized use of 185.300 (just in fun, of course).

Bill, and all,

I hope I'm not stepping on anyone.  I certainly don't want to and if I am
please let me know and I'll shut down.

When I first joined this list several weeks ago, I wanted to get on the
air and join in at the 185.3 watering hole if at all possible.  I didn't
know if I'd be succesful enough to be heard there, but that was my
intention.

As you know the design I'm using right now is a little inflexible on the
frequency ... well, you are limited only by the number of oscillators you
have :)  And I have two.

That's why I was looking for some screen captures, beacuse I wanted to
come in there near you guys but not step on anyone.  But really I'm a
slave to whatever frequency the oscillator ends up running.  I had
intended 185.302 but ended up with 185.300.

I have another oscillator that would put me near 189.5.  I need input from
you guys, though, as I have no rx setup.  If I should move, I will.  I was
hoping not to, though, because I know many are listening near 185.3, and I
feared that if I moved to 189.5ish I wouldn't get any more reports :(

I AM working on the DDS exciter, though, so this will all be moot, soon.

So please let me know if I need to move, and please accept my apologies if
I've impinged upon anyone's established frequency .. it was unintentional.
Also please know I'm working feverishly on the DDS exciter which will
allow me to move about in sub-hertz steps.

Thanks,
Eric

_