[Lowfer] USA back on the air at 185.298 with DFCW

Tue, 4 Mar 2003 11:48:16 -0500

Hello Larry,

Wow thanks for the nice capture of USA and NC.
I spent several hours trying to program the HPIB port on my 3586B and it is
really nice to see a capture.

Actually anyone familiar with the HPIB could have done the programming in a
couple of minutes.

The thing that I wanted to see was the spacing between characters and
judging by your capture it looks reasonable.

OOPS  the carrier was left on today when I terminated the program.  I am
trying to insert some variables into the program so the QRSS speed and
spacing can be changed easily.

Thanks again for the captures! I reqally appreciate it!

PauLC
W1VLF

----- Original Message -----
From: "Larry Putman" <[email protected]>
To: <[email protected]>
Sent: Tuesday, March 04, 2003 10:07 AM
Subject: Re: [Lowfer] USA back on the air at 185.298 with DFCW

> Paul,
>
> My K9AY antenna is crippled until I get some new coax but I was able to
see
> your signal last night!
> These 2 captures show your DFCW and just above your signal is NC also
using
> DFCW. This morning
> I am just seeing a carrier no DFCW.
>
> Hope this help!
>
> 73
>
> Larry WB3ANQ
>
> ----- Original Message -----
> From: "paulc" <[email protected]>
> To: "[email protected]" <[email protected]>
> Sent: Friday, February 28, 2003 10:12 PM
> Subject: [Lowfer] USA back on the air at 185.298 with DFCW
>
>
> > Hello Folks,
> >
> > USA is back on the air using the HP 3586b Selective Level Meter as the
> > exciter.  I was able to program the unit via the HPIB portto do
something
> > moderately
> > resembling  DFCW with a 1/2 hz shift.  I am not sure that I have the
> spacing
> > correct between the elements, they seem to bunch together.
> >
> > Can someone please take a look and comment on the shift and the spacing.
> >
> > Thanks
> >
> > W1VLF
> >
> > PauLC
> >
> >
> >
> >
> > _______________________________________________
> > From the Lowfer mailing list
> > Send messages to: [email protected]
> > To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>
> _______________________________________________
> From the Lowfer mailing list
> Send messages to: [email protected]
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer