[Lowfer] NC in June

[John Andrews]

Dale,

> Would you tell us what you are using for the RX setup?

My receiver is an ICOM R75. A description of the loop antenna may be found
at:
http://webpages.charter.net/w1tag/rxloop.htm . I used ARGO software on the
30 second screen, running captures every 20 minutes overnight.

The biggest problem for people starting out with this stuff is knowing the
frequency accurately enough to get the desired station on the screen. And of
course the receiver must be stable enough to keep it there. What are you
using for a receiver, and how confident are you about being able to read
accurately down to 1 Hz?

John Andrews