[Lowfer] Some snow coils

[Eric Smith]

That is what I'd like to do -- put it inside the building.  But I'm not 
going to want to cut any holes in the roof.  Wouldn't using coax cancel 
the effects of passing through the steel shell, that you were concerned 
about?  Or doesn't it work that way?



On Thu, 13 Feb 2003, Bill Ashlock wrote:

> Lyle,
> 
> >But you're probably OK as long as the spacing from the roof is a >couple of 
> >coil diameters. The bottom of my coil is about 5
> >feet above the roof, supported on a PVC pipe that is guyed to the roof 
> > >with Dacron ropes.
> 
> What is your expert opinion on mounting the coil inside as long as there is 
> plenty of metal removed where the wire feeds through the roof? It would seem 
> to be a way to insure a long life for the coil.
> 
> Bill
> 
> 
> _________________________________________________________________
> Add photos to your messages with MSN 8. Get 2 months FREE*.  
> http://join.msn.com/?page=features/featuredemail
> 
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer@mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer
>