[Lowfer] Loop signal differential

[Dexter McIntyre W4DEX]

Bill,

I thought you beacon was not on the air last night.  As of midnight IP
was the only signal I had seen all evening so I shut down.  

Dex

Bill Ashlock wrote:
> 
> John A,
> 
> >Not sure what you're doing, but the "LSB" is about 6 dB stronger than >the
> >"USB" this morning.
> 
> I turned the test loop (upper signal) about 35 deg toward the SW last night,
> in two steps, the final one about 1:00am. Surprised this made so much
> difference at your base. The input currents are the same as yesterday.
> 
> BTW, that test loop, in spite its high Q, is incredibly insensitive to it's
> position relative to the ground (snow). It was resting on the snow at one
> time and I could bring the current back to its normal value with a small
> change in the frequency.
> 
> Thanks for the input John. I hope L^2 (Larry and Lloyd), D, or B, did some
> monitoring last night so I can see what the new signal ratio is at their
> locations. This should have just about shut off the test loop signal at
> Bryce's base but it should have picked up SW of here.
> 
> Bill
> 
> _________________________________________________________________
> The new MSN 8: smart spam protection and 2 months FREE*
> http://join.msn.com/?page=features/junkmail
> 
> _______________________________________________
> >From the Lowfer mailing list
> Send messages to: Lowfer@mailman.qth.net
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer