[Lowfer] WA sending N/S for a change

Sat, 20 Dec 2003 23:45:08 -0600

OK. I know there is one limb, which will snag the tubing as it did on all
the ropes and the #12 wire when I pulled and swore at the darn thing. I'll
have to figure out how to make the leading edge more aerodynamic so it
slides over the nasty limb up there. I used duct tape the last time and it
looked good on the ground but was a SOB once it got snagged.

Mike>WE0H

-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of KD7JYK
Sent: Saturday, December 20, 2003 11:30 PM
To: [email protected]
Subject: Re: [Lowfer] WA sending N/S for a change

Check your resonance after you get it up, it may stretch quite a bit.  I get
about 6" stretch per 50' with 12 AWG copper.  Pulling it slowly will help.

Kurt

---
Ross Technologies Signals Intelligence Division
Rosetta Proving Ground

----- Original Message -----
From: WE0H <[email protected]>

> OK. I have a 200' piece of 3/4th inch climbing rope that I can pull up
with
> my #12 and then I can hook up the truck and giver hell if the tubing
decides
> to park on a limb way up high!!!

_______________________________________________