[Lowfer] Billboard display - LEK

Sat, 23 Nov 2002 11:14:25 -0600

Listening on that new TX...err RX loop that is??? Hi hi...

Mike>WE0H
http://www.we0h.us/lf.html
185.3026kc QRSS-30 & CW@15wpm
ID is "WE"

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Lyle Koehler
Sent: Saturday, November 23, 2002 10:23 AM
To: [email protected]
Subject: Re: [Lowfer] Billboard display - LEK

Great captures, Mitch! The multi-tone Hellschreiber (MT-Hell) mode is not as
effective for weak signal work as QRSS30, because the "dots" (literally) are
only about 8 seconds long. But when it does come through, the signal is
distinctive. My new ZL1BPU exciter is driving the same old
complementary-pair final that has been running for the past few years. I
have the sine-wave output level of the exciter set to 4 volts p-p. The
exciter will deliver considerably more than that, but the transmitter output
stays constant with any drive level greater than about 3 volts p-p.

LEK will probably be off the air for the next two or three nights to do some
listening, now that my noise problems have been fixed.

Thanks, Mitch.

Lyle, K0LR

_______________________________________________
From the Lowfer mailing list
Send messages to: [email protected]
To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer

_____________________________________________________
This message scanned for viruses by CoreComm