[Lowfer] TMO/EIS

[Bill Ashlock]

Mike S,

>I re-worked the code for the Identifier for my LW-MAX. In an inspiration=
al
>breakthrough, I was able to write code for the identifier that allows me=
 to
>transmit TWO modes at the same time!

>On my old (variable) frequency you can now look for my beacon identifyin=
g in
>BOTH the QRSS30 and QRSS90 modes.

This means there are three of us fighting for that 185.3000 spot?

>If you use QRSS30 the ID should appear as TMO. If you use QRSS90 the ID =
for the beacon is EIS.

I'm from Missouri!

>Location is the same but I am running a full 13.5 volts on the final ins=
tead
>of the 11.5V that the card wanted to supply.

This should be an improvement in power control - maybe freq stability too=
. So what about the input power? Should have to ad a turn to the primary =
of the xformer to account for the increase in Vcc. Remember, the DC input=
 power is totally dependent on the AC load you put on the transmitter.  T=
herefore there is no such thing as a 1W transmitter unless the resistive =
load is specified (and it sure is not 50 ohms in this case). Recommend us=
ing a Vcc up to the max - maybe 24vdc. That would require ~doubling the p=
rimary turns to hold the power to 1W. =20

>Sleet has turned to rain here and the ground is now rather saturated.

But the loop current hasn't changed an iota, right?

BillGet more from the Web.  FREE MSN Explorer download : http://explorer.=
msn.com


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---