[Lowfer] TMO/EIS

Tue, 5 Nov 2002 22:26:24 -0800 (PST)

Hey Mike,
If you have source code that will run the LW-MAX in a true QRSS30 and
QRSS90 modes, then I am interested in that code.  WE0H sent me a
revision that wanted to work, but it did not vary the dots, only the
dashes.  The dots stay at a fixed 3 seconds.  If you have written a
true 3 to 1 verion that works please fill me in!
Cheers,

Steven  BZS
--- Mike Staines <[email protected]> wrote:
> I re-worked the code for the Identifier for my LW-MAX. In an
> inspirational
> breakthrough, I was able to write code for the identifier that allows
> me to
> transmit TWO modes at the same time!
> 
> On my old (variable) frequency you can now look for my beacon
> identifying in
> BOTH the QRSS30 and QRSS90 modes.
> 
> If you use QRSS30 the ID should appear as TMO.
> 
> If you use QRSS90 the ID for the beacon is EIS.
> 
> Location is the same but I am running a full 13.5 volts on the final
> instead
> of the 11.5V that the card wanted to supply.
> 
> Sleet has turned to rain here and the ground is now rather saturated.
> 
> Mike
> 
> _______________________________________________
> From the Lowfer mailing list
> Send messages to: [email protected]
> To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer

__________________________________________________
Do you Yahoo!?
HotJobs - Search new jobs daily now
http://hotjobs.yahoo.com/