[Lowfer] LW-MAX final amp components...

[WE0H]

My LW-MAX has a BD-135 and a BD-137 in the final circuit. I found a broken
cap in the VCO a few minutes ago and repaired it, as there was enough lead
to solder to. Maybe this is why mine was so fluky. I also filled in all the
feedthru holes that weren't touched with an iron before. There were 90% of
the components that weren't flowed through to the topside. They are all
repaired now. There is a lowpass filter on the output that uses two 100uh
chokes in what looks like a T type filter. Since it is a double-sided board,
it would be possible to reverse engineer this card to produce a schematic.
That would take a while though. Some of the caps have no markings so a guy
would have to remove them and put them on the cap meter.

So far, BRO and RM are screaming in here down and up the band from the
loopers.

Mike>WE0H
http://www.we0h.us/lf.html