[Lowfer] TAG on the air for testing
John Andrews
[email protected]
Sun, 20 Jan 2002 18:31:26 -0500
Jay,
Who knew that this dog of an antenna had bones! Amazing... 2 amps of
current, and it actually went somewhere!
Your place in history is assured. Thanks very much.
John Andrews, W1TAG
----- Original Message -----
From: "Jay Rusgrove" <[email protected]>
To: <[email protected]>
Sent: Sunday, January 20, 2002 5:46 PM
Subject: Re: [Lowfer] TAG on the air for testing
> John
>
> Here is a capture of TAG. Some dog bone action going on. Will run a couple
more
> as the evening goes on.
>
> http://www.advancedreceiver.com/capture/00123.jpg
>
> Jay Rusgrove, W1VD
>
> John Andrews wrote:
>
> > TAG will be on the air for a couple of days for testing. The frequency
is
> > 185.810 kHz. The format is DFCW (dual frequency CW) with 60 second
elements,
> > and 0.2 Hz shift. Current status of the beacon, and a description of the
> > DFCW format may be found at:
> >
> > http://webpages.charter.net/w1tag/
> >
> > This is a marginal antenna setup, but any reception reports will be
> > appreciated. I've been able to double the antenna current, so
performance
> > should at least be better than my last effort.
> >
> > No listings yet, please.
> >
> > John Andrews, W1TAG
> >
> > _______________________________________________
> > Lowfer mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/lowfer
>
> _______________________________________________
> Lowfer mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/lowfer