[Lowfer] Question on Jason reception???

Sun, 20 Jan 2002 10:11:51 -0600

Denis,
You can use either mode. Just make sure you know your BFO frequency and
enter it in the RX center frequency box under the options button. The
default offset is 800hz. You will have to listen to a time standard signal
like WWVB @ 60kc if you can and calibrate the Jason band view window, now
move your mouse pointer over the window and you will see that it turns into
a crosshair. Put the crosshair over the signal trace and left click the
mouse. This will center Jason's receive window. You should be good to go
now.
73's,
Mike>WE0H
http://www.geocities.com/we0h/index.html

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Denis Cote
Sent: Sunday, January 20, 2002 8:52 AM
To: [email protected]
Subject: Re: [Lowfer] Question on Jason reception???

which mode, cw or ssb?

Denis
W1WV
----- Original Message -----
From: "Dexter McIntyre W4DEX" <[email protected]>
To: <[email protected]>
Sent: Saturday, January 19, 2002 10:58 PM
Subject: Re: [Lowfer] Question on Jason reception???

> 20 Hz is best.  All tones are +/- 4 Hz of center freq.  Make sure you
> enter your BFO freq in the RX center freq box.
>
> Dex
>
> WE0H wrote:
> >
> > Can I use a 20hz filter for receiving Jason signals??? My choices are
20,
> > 400, 3100hz filters.
> >
> > Mike>WE0H
> > http://www.geocities.com/we0h/index.html
> >
> > _______________________________________________
> > Lowfer mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/lowfer
>
> _______________________________________________
> Lowfer mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/lowfer
>

_______________________________________________
Lowfer mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/lowfer