[Lowfer] Re: Amplifiers for 136k

[BOB RIESE]

nicely done John
saved a copy to M folder

My one time on the air used the same output final with out the filter
I tuned the antenna/feed to freq with an old NDB variometer. Real 
interesting to see the wave shape change as the thing tuned, Was a good
Square wave 
into a 50 ohm resistive load. Looked like a proper sine wave on freq
and really ugly anywhere else. Filters are necessary to keep folks up
frequency happy
it will be interesting to see how the learning curve goes when activity
starts on 136
I wonder what kind of info QST will have to offer. This band will really
lend itself to
loads of fun and I suspect many surprises


Bob  K3DJC 
 

 



On Thu, 22 Aug 2002 15:06:12 -0400 "John Andrews" <w1tag@charter.net>
writes:
> I mentioned last night that I would post a schematic for an outdoors 
>1 watt
>Lowfer transmitter that expects a 2 volt p-p input (10 mW). It may be 
>seen
>at:
>
>http://webpages.charter.net/w1tag/files/TAG-XMTR.jpg
>
>Look at it in full-screen mode, or you may lose some lines. In case of 
>a
>paternity suit, contact Lyle Kohler first. <g>
>
>John Andrews
>
>_______________________________________________
>From the Lowfer mailing list
>Send messages to: Lowfer@mailman.qth.net
>To sub/unsub visit: http://mailman.qth.net/mailman/listinfo/lowfer