[Lowfer] 185.300 Tonight

Tue, 2 Apr 2002 20:47:32 -0500

John, and group

Thanks for the shot!!  I am also using a loop here.
45 feet per side.  Would have been 50 if I could just to get the hang of
using a tape measure.

It is resonated with 8800 PF of silver micas.  Fed with 350' of RG-59 and
Ferrite core through which the loop passes(1 turn).

12 turns on the primary and it s a FT 1.4 -77 core. Have not played with
matching yet

60 millwatts of power go into the coax.

Could you do the mouse trick and hold it over my signal and then his to get
an idea of SNR difference between us.
This way I will know what size line to have the power company run into my
house so I can compete with him!!!

Thank you

BTW we are about 3 miles apart so it will be interesting to see if we fade
together.

Paulc
W1VLF

This Email was brought to you by a completely solar powered home network.

Cloudbounce Webpage  http://www.qsl.net/w1vlf/
GE Electrak E20 and E15  electric tractors
Air Rifle Target Shooting Enthusiast

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of John Andrews
Sent: Tuesday, April 02, 2002 8:12 PM
To: [email protected]
Subject: [Lowfer] 185.300 Tonight

Paul Cianciolo requested that I look at 185.305 kHz tonight. I am posting
screen shots of 300 - 305 every 15 minutes at:

http://webpages.charter.net/w1tag/cap-1.jpg

As of this writing, WA appears to be off the air, and VD and VLF are
visible. VD's the one with the dog bones.

John Andrews, W1TAG  (TAG is off the air)

_______________________________________________
Lowfer mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/lowfer