[LogPlus] LOGPlus Version 4.2 Change History.

[Bob Winters]

I'm still updating a few suggestions.  So far 99.9% have been
implemented or fixed.

-New- Added Kenwood TS-2000 support.  Under the Radio Set Up, make sure
you enter TS2000

NOTE:  Though the changes have been made, I do not have the TS-2000 to
test with.  If it does not function correctly, please let me know.

-Fixed- Logging Module with Packet (B) - Changed F10 to display all
previous QSO's once call is entered inside call field.  Previous version
required pressing "ENTER" before F10.
-New- Modified TNC support in Logging Module with Packet (B) and
Terminal program (B).  On some computers, TNC port would not open on
first attempt. Forced port open/closed then open when loading.

-Fixed- Modified the format for sending spots with ALT_F4.  Removed all
leading spaces from the frequency to conform with some of the newer
packet cluster software.
-Fixed- In Logging with Packet (B), name field was not being updated
properly.

-Fixed- QRP logging would not stay selected after leaving the logging
program.
-Fixed- QSL Card Update - When selecting various QSL methods, QSL Date
was not being updated.

-New- Added RTTY tracking in the County Hunter Program.  This will
require and update to the County Hunter database. The update will be
automatic during the installation process.  Just wanted to let you know
to "BACKUP" your database (county.dbf) before running the update.
-New- Added Award Auto Update (previously in V3).  From the main menu,
if you press ALT_G, the following awards will be automatically updated -
DXCC, WAZ, WAS, WPX, IOTA, COUNTY and VUCC.

-Fixed- DXCC Auto Update would replace "S"ubmitted entries with
"C"onfirmed.  
-New- The following ALT KEY changes have been made to the LOGGING
program.  In addition, the ALT_H help file has been updates as well.

ALT_B - Browse Logbook 
ALT_E - Browse DXCC Award 
ALT_K - Browse US Islands Award 
ALT_O - Browse IOTA Award 
ALT_P - Call to Prefix Update 
ALT_S - Browse WAS Award 
ALT_T - Browse County Hunter Award 
ALT_V - Browse VUCC Award (Starts in VUCC50) 
ALT_W -Wipe Out QSO Information - This is added for you DX'ers in Pile
Ups.  If you enter the call and then don't finish the QSO just press
ALT_W and it will wipe the QSO clean and get you ready for the next
call. 
ALT_Z - Browse WAZ Award 
-Fixed- FO/M changed from zone 31 to zone 32.

-New- VP6/D Ducie Island added to all required databases.  If you're
already updated your file, nothing will happen.

-New- IOTA updates added.  Special thanks to W1NG for years of support
here.

-Fixed- County update (F7) would not save band information when (F10)
was pressed to move data over from the log.  In addition, the county
number was not be transferred back to the logbook.

-New-  When using the County update (F7) with NEW MIXED MODE entries,
the program will automatically update the appropriate County MODE entry
as well.  CW, SSB or RTY will automatically be updated after the mode
information.

-New-  PRFX.DBF file.  This file now contains an additional 344 Russian
Prefixes to make sure the proper ZONE is placed in the log.

-New-  6 and 2m DXCC added to all other DXCC updates and menu's. 

-Fixed- Contest Conversion.  Updated browser screen to show F10=Delete
File    It works now but just not on displayed on the screen.

-New- Added P> to the ALT_F11 to allow you to display MIX vice DIG on
the logging screen.  Many folks don't use DIG.  This is especially
useful for PRE 1975 CW contacts.  Old timers will understand...No - I
don't fit that group. I didn't become a ham until 79!

 


********************
Everett Data Systems
Robert A. Winters, RCDD, CCNP, CCDP
9909 121st Ave NE
Lake Stevens, Washington 98258
Phone - (360) 653-9652 
eFax   - (815) 461-9741
Home Page:  www.logplus.org
********************