[LOGic] Logic 9

[vietvon at comcast.net]

looks like your advice has worked perfectly.....not a single "time out" or a "Logic must close" blurb since following your advice. Thanks so much, it has not been fun or pretty using Logic 9 and I've been frustrated at not knowing what to do.....that stuff would happen one Q after another during contesting then the "Close" business made for a non-happy time. Thanks to you though all seems well now. 
vy 73, 
Nick W9UM 


----- Original Message -----

I deleted all of the .CDX files. I think there were 14 of them. The .CDX files are index files and get rebuilt the next time you run LOGic9. 

I was using the Legacy rig driver for a while, then things settled down and I was able to use the new rig drivers. 


73 de Ron NØAT 




-----Original Message----- 
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net] On Behalf Of vietvon at comcast.net 
Sent: Wednesday, February 12, 2014 18:52 
To: logic at mailman.qth.net 
Subject: Re: [LOGic] Logic 9 

Ron, which .CDX files as I have a bunch. Also, using the Legacy seems to have helped even though my rig isn't listed under the ICOM list. Instead of a IC765 a IC 775 is listed to used that Legacy. 


----- Original Message ----- 

Nick, 
Using the legacy rig drivers might help. When I have trouble I do this: 

Exit LOGic. Do a CLEAN UP INDEXES AND TEMPORARY FILES. Next, delete all of the .CDX files located in the folder that contains your database. Start LOGic. 


73 de Ron NØAT 



-----Original Message----- 
From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net] 
On Behalf Of vietvon at comcast.net 
Sent: Tuesday, February 11, 2014 20:13 
To: Logic 
Subject: [LOGic] Logic 9 

I need some practical information concerning Logic 9. Since the installation it has not behaved as had 7, or 8. I continuously get "restart" notices and "Logic has to Close". I'm sick of it. The interface is working properly, the com ports are adjusted and so is the rig interface using the all other Icom interface. I'm using my trusty IC765 and while Logic worked like magic in earlier editions 9 is not. Has anyone had similar problems? 
vy 73, 
Nick W9UM 


General Order #1 To take charge of this post and all government property in view. 
General Order #2 To walk my post in a military manner, keeping always on the alert and observing everything that takes place within sight or hearing. 
General Order #3 To report all violations of orders I am instructed to enforce. 
______________________________________________________________ 
LOGic mailing list 
Home: http://mailman.qth.net/mailman/listinfo/logic 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:LOGic at mailman.qth.net 

This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________ 
LOGic mailing list 
Home: http://mailman.qth.net/mailman/listinfo/logic 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:LOGic at mailman.qth.net 

This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________ 
LOGic mailing list 
Home: http://mailman.qth.net/mailman/listinfo/logic 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:LOGic at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________ 
LOGic mailing list 
Home: http://mailman.qth.net/mailman/listinfo/logic 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:LOGic at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html