[LOGic] LOGic locking up

[Rich Kelly]

Here are the ports that would have to be opened for NIST, I think.

udp port 123, which is used by the network time protocol and the simple
network time protocol.  The NIST client software can be configured to use
this port, but does not use it by default.

• tcp port 13, which is used by the NIST client software by default and by
other programs that use the “daytime” protocol.

•tcp port 37 and udp port 37, which are used by DATE, RDATE, SDATE and by
other programs that use the “time” protocol

On Thu, Jun 16, 2011 at 1:03 AM, Bill Lovell <arsk7jbq at yahoo.com> wrote:

> Rich,
>
> I did that with Logic, no effect. Don't know how to do that for NIST.
>
> 73,
>
> Bill
>
>
> ________________________________
> From: Rich Kelly <richpdc at centurytel.net>
> To: "logic at mailman.qth.net" <logic at mailman.qth.net>
> Sent: Wednesday, June 15, 2011 6:20 PM
> Subject: Re: [LOGic] LOGic locking up
>
> Can't you just make an exception in the firewall for logic or the NIST
> update and leave the firewall on?
> Rich KB9RNO
>
> On Wed, Jun 15, 2011 at 8:16 PM, Bill Lovell <arsk7jbq at yahoo.com> wrote:
>
> > Hi Dennis,
> >
> > Since I was the guy who mentioned the NIST connection, herewith an
> update:
> >
> > Turning the Firewall off (Windows XP Pro, SP 3), allows LOGic to open
> > normally, access NIST and reset the system clock. With the Firewall on,
> it
> > freezes up just at the point where (normally) the time set pop-up would
> > appear. Then it persists in using between 95 and 98% of the CPU until I
> shut
> > it down.
> >
> > Either NIST changed something, or one of the never-ending Windows updates
> > did. The program worked fine with this configuration until about a month
> > ago.
> >
> > In any event, it's a simple enough matter to turn the Firewall off, start
> > LOGic, then turn the Firewall back on.
> >
> > TNX and 73,
> > Bill. K7JBQ
> >
> > From: Dennis <dh at hosenose.com>
> > To: logic at mailman.qth.net
> > Sent: Wednesday, June 1, 2011 5:29 AM
> > Subject: [LOGic] LOGic locking up
> >
> > Hi Everyone:
> >
> > I've had about a half-dozen calls about LOGic locking up. Someone
> > tracked the problem down to LOGIc's feature where the clock may be set
> > to NIST.
> >
> > Funny thing is, it still works here (Win 7 64-bit).  One time I got a
> > FAILED TO SET CLOCK message, but it never locks up.  CPU usage is near
> > 50% while it is waiting (dual-core CPU, so this is consistent), but when
> > it succeeds or times out, it drops back to 1 or 2%.
> >
> > You can get back into the program by deleting \LOGIC8\PDA.INI, or better
> > yet by modifying PDA.INI and deleting this line
> >
> > SetClockToNISTOnStartup=Yes
> >
> > If you want to try to mess with it, try turning off any firewall.  I am
> > running the Win 7 firewall, though -- as long as traffic is initiated by
> > your computer, it should open the port.
> >
> > Tnx & 73,
> >
> > Dennis WN4AZY
> >
> > ______________________________________________________________
> > LOGic mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/logic
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:LOGic at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > ______________________________________________________________
> > LOGic mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/logic
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:LOGic at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> >
>
>
> --
> Rich Kelly
> Kelly Creation Computers
> 608-732-5359
> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>


-- 
Rich Kelly
Kelly Creation Computers
608-732-5359