[LOGic] TS-450s question

[Jeff Dillon]

Dennis, it plugs into the DSP-100 port on the side of the radio. This port is 
ACC1.
Look on page 74 of the insruction manual for the pinouts.
There also is a External Control manual for the 450/690 that is seperate from
the Instruction manual. I would think it would be on the Kenwood site also.
This manual also has the pinouts and goes into more detail on the comms
between the radio and whatever is controlling it.

I have a homebrew level converter plugged into my 450 and it works perfectly.

Jeff - N9BBE



________________________________
From: Dennis <dh at hosenose.com>
To: LOGic is open to all radio amateurs for discussion of LOGic logging program 
<logic at mailman.qth.net>
Sent: Sun, January 9, 2011 10:56:14 AM
Subject: [LOGic] TS-450s question

Hi--

Can anyone tell me where the level converter plugs into the Kenwood TS-450?

I have been told ACC1. But  I downloaded a 450/690 manual, and on page 
23  It shows an ACC2, which implies an ACC1. But there is no ACC1 in 
this diagram.


Does it plug into DSP2 or DSP3 per chance?

Thanks in advance,

Dennis
______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html