[LOGic] FW: LOgic 8 - ADIF Import Issue

[ErBarone]

Hello Robie,
I have the same problem transferring from writelog ADIF file.
The only difference is that the byte position is 15.
When the import data finished does not appear that there are transfer errors.
So just a warning would be something that has no 
negative effect on the transfer data.
This is my experience.
73's de IKØCHU Mauro
***


At 26/02/2011 15.36, Robie Elms wrote:
>Dennis,
>
>Please review the following information and e-mail string.  I believe there
>is a "bug" in the ADIF import routine in 8.0.103.  This morning I imported
>the attached adif file from mixw.  I received the following messages during
>the import process:
>
>ADIF Import
>
>Starting to process data at Byte position 97
>
>
>I acknowledged this message and received:
>
>ADIF Import
>
>Find_Fld():Read 1 Bytes and found no Start-of-tag <
>
>
>I acknowledged this message and the rest of the import process seemed to
>work properly.
>
>
>Any feedback would be appreciated!
>
>Robie - AJ4F
>
>-----Original Message-----
>From: Robie Elms [mailto:aj4f at comcast.net]
>Sent: Monday, February 21, 2011 5:45 AM
>To: 'logic at mailman.qth.net'
>Subject: RE: [LOGic] LOgic 8 - ADIF Import Issue
>
>Joe,
>
>I installed 8.0.103 a few weeks ago and this is my first import since the
>install.  My ADIF log came from Writelog.
>
>Robie
>
>-----Original Message-----
>From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
>On Behalf Of Joe Dubeck
>Sent: Sunday, February 20, 2011 10:12 PM
>To: logic at mailman.qth.net
>Subject: Re: [LOGic] LOgic 8 - ADIF Import Issue
>
>Robie-
>
>Yes, I just imported two separate ADIF log files to LOGic-v8.0.103. One log
>was from TRX-Manager and the other was from Win-Test. I saw the same message
>as you except I'm not certain it was a "15." I've often imported from
>TRX-Manager but this is the first time from Win-Test. I've never had that
>message before, and like you, everything seems to have imported correctly. I
>suspect this bug was introduced in the last patch, whenever that was.
>
>73, Joe, NA9A
>
>-----Original Message-----
>From: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net]
>On Behalf Of Robie Elms
>Sent: Sunday, February 20, 2011 7:23 PM
>To: LOGic at mailman.qth.net
>Subject: [LOGic] LOgic 8 - ADIF Import Issue
>
>All,
>
>
>
>When I attempt to import an ADIF file into Logic 8 I get the following
>message:
>
>
>
>ADIF Import
>
>
>
>Starting to process data at BYTE position 15
>
>
>
>
>
>If I proceed the file seems to import successfully.  Has anyone else
>encountered this issue?  Know the cause and or cure?
>
>
>
>Thanks in advance,
>
>
>Robie - AJ4F
>
>
>
>______________________________________________________________
>LOGic mailing list
>Home: http://mailman.qth.net/mailman/listinfo/logic
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:LOGic at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
>______________________________________________________________
>LOGic mailing list
>Home: http://mailman.qth.net/mailman/listinfo/logic
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:LOGic at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html