[LOGic] K3 Support
Allen Brier N5XZ
n5xz at earthlink.net
Thu Dec 1 12:38:04 EST 2011
Once again I echo what Bill is saying here. And I know that even when Dennis gets the TS-850 driver updated, it will not work 100% correctly with the K3. For example, when clicking on "SET RADIO" from the spot log, LOGic will change mode first, then frequency. However, the K3 will change to the mode last used on that band, sometimes to the wrong mode. A second click on "SET RADIO" will fix it, but it is quite an annoyance. Also, I get a communication error when I click the VFO A/B switch. As a matter of fact, I lose communications much more often than I should.
I know of several ex LOGic users who would probably come back if the driver issue were corrected. I have been a loyal LOGic user since 6 (I think) and am looking forward to Dennis gets the K3 driver working ("soon"). With nearly 100,000 QSO's in the log, it otherwise works extremely well. (I do have a list of bugs and feature requests, but that will be a topic for another email.)
Allen N5XZ / KL5DX
-----Original Message-----
>From: logic-request at mailman.qth.net
>Sent: Dec 1, 2011 11:03 AM
>To: logic at mailman.qth.net
>Subject: LOGic Digest, Vol 92, Issue 1
>
> 1. Re: K3 Support (Bill VanAlstyne W5WVO)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Thu, 1 Dec 2011 10:59:21 -0000
>From: "Bill VanAlstyne W5WVO" <w5wvo at cybermesa.net>
>Subject: Re: [LOGic] K3 Support
>To: "[LOGic]" <logic at mailman.qth.net>
>Message-ID: <D89DA630BD594C0BB65981BF8A3C1E57 at BILLHP9250>
>Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
>Dennis wrote,
>
>*I am first redoing the Kenwood 850 driver with the new platform. If
>anything doesn't work, I will do a k3-specific driver. We want to get
>all of the buttons on LOGic working with the K3.*
>
>Yes, that is what we want. We want all the buttons currently implemented in
>LOGic to work properly on the K3 as they work on other rigs.
>
>More than that, even if you do get the TS-850 driver to work perfectly with
>the K3, I think it would be a very smart move on your part to replicate it
>and list it as a K3 driver as well. There is simply no "LOGical" explanation
>for not showing direct native support for a radio that is now used by
>virtually every DXpedition, not to mention thousands of top DXers, around
>the world. Check out the DXpedition web pages: K3s, K3s, K3s. Look at the
>photos: K3s everywhere you look. (I did see one the other day that was using
>K2s. LOL)
>
>Dennis, this is more a marketing issue than a technical issue. Do most LOGic
>users use the control buttons on the bottom row? I don't know; probably not.
>(They certainly don't if they have a K3, because they don't work.) But the
>ABSENCE of native, correctly functional K3 support is a huge blooper in the
>eyes of most knowledgeable hams. It's like, "Huh? WTF?" No other logging
>program I know of, free or paid, doesn't have basic (VFOs/modes) K3 support
>that works. There might be one, but if so I don't know about it.
>
>Bill W5WVO
>
>PS -- Maybe you've never used a K3 on CW, where it outclasses anything else
>out there, regardless of price, by a country mile. Arrange to have somebody
> >>who really knows how to use it<< do a demo when the DX is running; it's
>worthwhile. It will blow your mind. Might even be motivating. :-)
>
>-----Original Message-----
>From: Dennis
>Sent: Wednesday, November 30, 2011 19:16
>To: logic at mailman.qth.net ; Allen Brier N5XZ ; W0SD Ed Gray
>Subject: Re: [LOGic] K3 Support
>
>I have posted this here before as I recall. If not, I apologize:
>
>*I am first redoing the Kenwood 850 driver with the new platform. If
>anything doesn't work, I will do a k3-specific driver. We want to get
>all of the buttons on LOGic working with the K3.*
>
>Is this acceptable?
>
>I will support all features that LOGic supports within limitations of
>the rig. I know that the K2 allowed switching between VFOs A & B. The
>K3 does not. Hopefully it will support Swap A & B (a new feature added
>to LOGic 9 for rigs that use a main/sub VFO arrangement). We will get
>all of the buttons on LOGic working.
>
>LOGIc 9 also supports OmniRig, so that will be another option for the
>K3. However, I expect that LOGic's native driver will actually offer
>more capability.
>
>I have gotten calls from K3 users and others complaining about OLE
>errors related to the COM port and the like. This is caused by Prolific
>USB=>RS232 adapters that are not fully RS-232 compatible, and is a
>well-documented problem that occurs with many software packages, not
>just LOGic. It is unlikely that Prolific adapters will work any better
>with LOGic 9 than 8. Get an FTDI-based adapter, and the errors will go
>away.
>
>I will not buy Logic 9 if it does not _fully _support the K3, end of story.
>
>Note that LOGic is not intended to be a remote operation program that
>fully replaces the front panel of the rig. We do not attempt to support
>every remote control command that a rig may have.
>
>If that is what you need, TRX-Manager IS a remote-control program.
>Laurent has a K3 and has added a lot of K3-specific features to
>TRX_Manager. Does it support_everything?_ Maybe not. But it is the
>most comprehensive K3 program out there. Here are some screen shots from
>his web site: http://trx-manager.com/edspe.htm#k3
>
>Tnx &73,
>
>Dennis WN4AZY
>
>
>On 11/30/2011 1:11 PM, Allen Brier N5XZ wrote:
>>
>> Thanks for the input, Ed. I am forwarding this to Dennis.
>>
>> I have already prepaid for LOGic 9 but am considering cancelling the
>> order without positive input from Dennis.
>>
>> Allen N5XZ
>>
>>
>> -----Original Message-----
>> From: W0SD Ed Gray
>> Sent: Nov 30, 2011 11:45 AM
>> To: Allen Brier N5XZ , "logic at mailman.qth.net"
>> Subject: Re: [LOGic] K3 Support
>>
>> I am blessed to own three K3's but far more importantly the K3's
>> are all over the world and not just here in the USA with many,
>> many of them sold so it should be supported. Also since it and
>> Ten Tec are the main USA made radios I sure think the USA based
>> Logic company should support the K3's. Lastly it is one of the top
>> radios in the world according to the Sherwood Engineering report
>> and at a reasonable price so why would you not support it??? To me
>> it is a no brainer if you want to sell software you support the K3?
>>
>> I will not buy Logic 9 if it does not fully support the K3, end of
>> story.
>>
>> Ed W0SD
>>
>> On 11/30/2011 11:38 AM, Allen Brier N5XZ wrote:
>>> I am in agreement with W5WVO: Dennis needs to implement native K3
>>> support. It is a PITA without it.
>>>
>>> Allen N5XZ
>>>
>>>
>>> -----Original Message-----
>>>> From:logic-request at mailman.qth.net
>>>> Sent: Nov 30, 2011 9:04 AM
>>>> To:logic at mailman.qth.net
>>>> Subject: LOGic Digest, Vol 91, Issue 12
>>>>
>>>> Send LOGic mailing list submissions to
>>>> logic at mailman.qth.net
>>>>
>>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>> http://mailman.qth.net/mailman/listinfo/logic
>>>> or, via email, send a message with subject or body 'help' to
>>>> logic-request at mailman.qth.net
>>>>
>>>> You can reach the person managing the list at
>>>> logic-owner at mailman.qth.net
>>>>
>>>> When replying, please edit your Subject line so it is more specific
>>>> than "Re: Contents of LOGic digest..."
>>>>
>>>>
>>>> Today's Topics:
>>>>
>>>> 1. QRZ.com change kills LOGic 8 (Bill VanAlstyne W5WVO)
>>>> 2. Re: QRZ.com change kills LOGic 8 (Julio Peralta)
>>>> 3. Re: QRZ.com change kills LOGic 8 (JACK)
>>>> 4. Re: QRZ.com change kills LOGic 8 (Warren Elly)
>>>> 5. Re: QRZ.com change kills LOGic 8 (Larry Osborne)
>>>> 6. Re: QRZ.com change kills LOGic 8 (Dave)
>>>> 7. Re: QRZ.com change kills LOGic 8 (Warren Elly)
>>>> 8. Re: QRZ.com change kills LOGic 8 (Robert Brady)
>>>>
>>>>
>>>> ----------------------------------------------------------------------
>>>>
>>>> Message: 1
>>>> Date: Wed, 30 Nov 2011 13:44:11 -0000
>>>> From: "Bill VanAlstyne W5WVO"<w5wvo at cybermesa.net>
>>>> Subject: [LOGic] QRZ.com change kills LOGic 8
>>>> To:<LOGic at mailman.qth.net>
>>>> Message-ID:<7737AB5CF2AD494EA093CAC3BAA3B022 at BILLHP9250>
>>>> Content-Type: text/plain; charset="UTF-8"
>>>>
>>>> QRZ.com has come out with a new look, and apparently under-the-hood
>>>> changes have rendered it toxic to LOGic 8. Any auto-lookup in QRZ.com
>>>> now crashes the Callbook applet and requires killing LOGic 8 through
>>>> Task Manager, cleaning, relaunching, etc. I?m assuming this problem is
>>>> due to QRZ.com?s upgrade, but if no one else is having a problem with
>>>> this, then perhaps I need some help with my setup. Please let me know.
>>>>
>>>> I would assume that LOGic 9 coming out and QRZ.com upgrading is an
>>>> unhappy coincidence. I do NOT want to have to wait for LOGic 9 (which
>>>> I?m not even sure I?m going to buy at this point, given continuing lack
>>>> of K3 support -- incomprehensible) to fix access to QRZ.com, which is
>>>> indispensible for a DXer trying to keep up with dozens of DXpeditions on
>>>> a daily basis.
>>>>
>>>> I am running 8.0.104, but I doubt any higher LOGic 8 revision (if
>>>> there is one) will fix this, as QRZ.com was just updated in the past
>>>> 24-48 hours or so. Does anyone have knowledge of any fixes for this, or
>>>> at least a timeline for a LOGic 8 fix? Please don?t tell me it will be
>>>> fixed in LOGic 9...
>>>>
>>>> Bill W5WVO
>>>>
>>>>
>>>> ------------------------------
>>>>
>>> ______________________________________________________________
>>> LOGic mailing list
>>> Home:http://mailman.qth.net/mailman/listinfo/logic
>>> Help:http://mailman.qth.net/mmfaq.htm
>>> Post:mailto:LOGic at mailman.qth.net
>>>
>>> This list hosted by:http://www.qsl.net
>>> Please help support this email list:http://www.qsl.net/donate.html
>>>
>>>
>
>______________________________________________________________
>LOGic mailing list
>Home: http://mailman.qth.net/mailman/listinfo/logic
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:LOGic at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>------------------------------
>
>_______________________________________________
>LOGic mailing list
>LOGic at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/logic
>
>
>End of LOGic Digest, Vol 92, Issue 1
>************************************
More information about the LOGic
mailing list