[LOGic] Adding a new Mode

[Longpath]

Hi Horacio

This is an old problem. I had the same problem when I put BPSK31 into the
mode table about three years ago I am surprised Dennis has not fixed the
issue yet.

The problem is the mode table is set up for a max of 5 characters by
default. BPSK31 and D-Star are 6 characters long. You need to change the max
value to six characters (or higher if you want) then put D-Star into the
mode table.

Go to tools/misc utilities/change size of log fields.  After changing Mode
to 6, go to tools/setup/modes and make sure nothing there is truncated.

73

Peter
EI9ES








-----Original Message-----
From: logic-bounces at mailman.qth.net
[mailto:logic-bounces at mailman.qth.net]On Behalf Of Horacio - LU1BJW
Sent: 08 November 2010 17:09
To: LOGic at mailman.qth.net
Subject: [LOGic] Adding a new Mode


Hello!

During the last 4 week I´m working DX stations on D-Star mode.
Today I add the mode in tools/setup/modes
filling the field as follows
Actual mode: D-star
Mode for Awards tracking : Phone
Adif Mode: Phone
Default RST : 59

However when I try to setup the mode on the QSL form the D-Star option do
not show up.

Any ideas?
73
Horacio - LU1BJW
Buenos Aires
Time Zone - 3 hours UTC
 <http://www.lu1bjw.net/> http://www.lu1bjw.net
http:// <http://www.l73d.com.ar/> www.l73d.com.ar


______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html