[LOGic] Com port number issue

[ve2dc at videotron.ca]

Can you not reassign the Com ports to ports less than 16 using your  computers Hardware Manager. It should be on the Resources tab.

----- Original Message -----
From: James Hall <heartdoc at nwtcc.com>
Date: Sunday, June 6, 2010 19:10
Subject: [LOGic] Com port number issue
To: 'LOGic is open to all radio amateurs for discussion of LOGic logging program' <logic at mailman.qth.net>

> Hi All:
> 
>  
> 
> I have added several rotator controllers and each has a Com port 
> number >16.
> When I try to assign the com port of one of the rotators, I am 
> met with no
> number higher than 16. Is this just a limitation of the program 
> or am I
> supposed to see any com port available ?
> 
>  
> 
> If it is a limitation of the program, can it be made not to be ? 
> Are there
> other alternatives ? Stand-alone programs like LP-Rotor have a 
> Com 9 limit.
> 
>  
> 
> 73, Jamie
> 
> WB4YDL
> 
> 
> 
> 
> 
> =======
> Email scanned by PC Tools - No viruses or spyware found.
> (Email Guard: 7.0.0.18, Virus/Spyware Database: 6.15150)
> http://www.pctools.com/
> =======
> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html