[LOGic] printing labels

[Horacio - LU1BJW]

 Hello:

First of all thank you very much to all of you for the suggestions.

I discovered that not only I have problems to print labels with logic, also
with MS Word.
With my new HP printer and the old one also.

I will go on with my research.

Thanks again.

73
Horacio - LU1BJW
Buenos Aires
Time Zone - 3 hours UTC
http://www.lu1bjw.net




-----Mensaje original-----
De: logic-bounces at mailman.qth.net [mailto:logic-bounces at mailman.qth.net] En
nombre de Horacio - LU1BJW
Enviado el: Miércoles, 27 de Enero de 2010 07:30 p.m.
Para: 'K0DAN'; 'LOGic is open to all radio amateurs for discussion of
LOGicloggingprogram'
Asunto: Re: [LOGic] MULTIPLE QSL LABELS, 3 QSOS PER LABEL 3-ACROSS

Hello:

I failed.
No way. Dennis do you have any suggestion?

73
Horacio - LU1BJW
Buenos Aires
Time Zone - 3 hours UTC
http://www.lu1bjw.net


 

-----Mensaje original-----
De: K0DAN [mailto:k0dan at comcast.net]
Enviado el: Viernes, 22 de Enero de 2010 03:21 p.m.
Para: horacio at lu1bjw.net; LOGic is open to all radio amateurs for discussion
of LOGiclogging program
Asunto: Re: [LOGic] MULTIPLE QSL LABELS, 3 QSOS PER LABEL 3-ACROSS

I have had this problem...but with my favorite label template (the one, same
as yours, but also with a sheet of address labels). I have NEVER been able
to get it to work (the printouts gradually creep off the labels). Dennis and
others have tried to help, but to no avail.

I think part of this may relate to type of printer you're using (I use a an
HP LaserJet 4, with Avery 5160 labels).

MULTIPLE QSL LABELS, 3 QSOS PER LABEL 3-ACROSS works OK with this
arrangement, but the other label template (with address) doesn't and I have
given up trying....instead I print the QSL labels, then print a sheet of the
address labels, and try (hope) to pair them up when I stuff envelopes.

If you wish I'd be happy to email you the template I use for the above
labels...I think someone may have modified it in the past...all I know is it
works, I keep backups, and I just make do.

GL es 73

Dan
K0DAN

----- Original Message -----
From: "Horacio - LU1BJW" <horacio at lu1bjw.net>
To: <LOGic at mailman.qth.net>
Sent: Thursday, January 21, 2010 6:12 PM
Subject: [LOGic] MULTIPLE QSL LABELS, 3 QSOS PER LABEL 3-ACROSS


Hello :

Whenever  I print the QSL labels (1" x 2 5/8") with different versions of
Logic, the first label is printed well, but in the second one the
information starts to be out of place : everything slowly moves upwards
getting worse.

I ´ve never edited the report "MULTIPLE QSL LABELS, 3 QSOS PER LABEL
3-ACROSS"

Has anyone  had the same problem ?

What can I do about this?


Horacio - LU1BJW
Buenos Aires
Time Zone - 3 hours UTC
http://www.lu1bjw.net


______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
LOGic mailing list
Home: http://mailman.qth.net/mailman/listinfo/logic
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:LOGic at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html