[LOGic] Problems with V8.0.98

[Bill VanAlstyne W5WVO]

You didn't say what version of Windows you are running... However, if you're 
running Windows Vista or Windows 7, something might have changed in v8.0.98 
that now requires administrator-level file accesses. I would try changing 
the executable properties (on logic8.exe) to run as Administrator, and if 
that doesn't clear it up, try running logic8.exe in a compatibility mode 
with an earlier Windows version -- all available from the Properties >> 
Compatibility path when you right-click on the executable. Just a suggestion 
to try, not a tested cure.

I'm running v8.0.97 on Windows 7 64-bit, and think I'll leave it at 97 for 
the time being, until this is cleared up. :-) Let us know what you figure 
out. BTW, in order to get this version (97) to run on Windows 7 64-bit, I 
had to configure the logic8.exe properties to run it as Administrator and in 
Windows 2000 compatibility mode. (Windows XP compatibility mode would 
probably have worked, too; I didn't try it.)

Bill W5WVO

--------------------------------------------------
From: "Charette, Douglas" <ChareDo at tulsaschools.org>
Sent: Wednesday, January 27, 2010 9:31 AM
To: <logic at mailman.qth.net>
Subject: Re: [LOGic] Problems with V8.0.98

> I'm seeing the. same thing when running reports.
>
> ----- Original Message -----
> From: logic-bounces at mailman.qth.net <logic-bounces at mailman.qth.net>
> To: logic at mailman.qth.net <logic at mailman.qth.net>
> Sent: Wed Jan 27 09:59:16 2010
> Subject: [LOGic] Problems with V8.0.98
>
> After installing V8.0.98 I'm getting numerous errors. I've tried running 
> "clean" but problems remain, everything was fine prior to the upgrade to 
> V8.0.98.
>
> Problems are missing files like:
>
> Error: pfxndx.dbf does not exist, logform.load, line 6
> Error: structural.cdx file not found callbook_web_asyn.load,line 4
> Error: Program Error: Table has no index set
>
> Several other missing files etc.
>
> All I did was run the logic8update98.exe file and everything just went to 
> pieces.
>
> Anybody else with these problems or idea how to resolve?
>
> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> LOGic mailing list
> Home: http://mailman.qth.net/mailman/listinfo/logic
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:LOGic at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html